February 2021 Archives

You may recall that we made a post about a month ago discussing "issues" that have been affecting the IQ Panel 2 Plus and its ability to be used as a secondary Z-Wave controller. We have a rather extreme follow up today, as Qolsys has revealed that the system never supported the feature!

When we released the initial post on the subject, we were not aware of the true" extent" of the issue. We certainly didn't expect to find out that Qolsys never even made it possible for the feature to work. We won't dive super deep into the subject here, as there really isn't much to say, The raw truth is that you cannot use the IQ2 as a secondary Z-Wave controller.

It is possible to add a secondary Z-Wave controller to the IQ Panel 2 and have the IQ2 operate as the primary controller. But you can never make the IQ Panel 2 System a secondary Z-Wave controller. We apologize for any inconvenience or confusion that this may have caused. For a more in-depth look at the subject, we strongly recommend reading this comprehensive FAQ that explains the inability of the IQ2 to be used as a secondary controller in much greater detail.

Now, maybe you have explored the Qolsys IQ Panel 2 Advanced Z-Wave Settings Menus in glorious detail, just like we have. If you have, then you will know that secondary controller options do exist within the IQ2 menus. Based on that alone, you would think that there must be a way to get this type of setup to work, right? That's the problem. The menu options might be there, plain as day. But trust us, if you try to make the IQ2 a secondary Z-Wave controller, then it will not work,

What we need to do now is focus on the implications that arise from the system's inability to be used as a secondary controller. As a result of the IQ Panel 2 being unable to operate as a secondary Z-Wave controller, the system loses out on potential compatibility with a wide selection of automation hubs. This includes compatibility with Samsung SmartThings, Vera Smart Controllers, Nexia Smart Home Automation Systems, and much more. Seriously, while the IQ2 once had excellent prospects of pairing nicely with almost any centralized Z-Wave hub, those prospects are all but gone.

Fortunately, there are other alarm systems that do not share this same limitation of the Qolsys IQ Panel 2 and IQ Panel 2 Plus. Most notably, we will recommend the Honeywell Lyric Controller. The Lyric has proven on repeated occasions to "play nicely" as a secondary controller. One example can be seen in this FAQ, which explains the benefits of making the Lyric a secondary Z-Wave controller, while also helping users get started. If you are thinking about purchasing a new Honeywell Lyric Alarm System for its excellent versatility in smart home automation, then you may also want to check out this buying guide. Although that particular buying guide was written for the Lyric during a holiday buying season a couple of years prior, it is still relevant in helping new Lyric System users explore their options for getting the most out of the system.

If you have any questions about the Honeywell Lyric or any other popular alarm control panel, or if you want to learn more about our monitoring services, send an email to support@alarmgrid.com. We're here to check your emails from 9am to 8pm ET M-F. We look forward to hearing from you!

Two new products have been added to the Alarm Grid website. The Resideo PROWLTOUCHC Wireless Touchscreen Keypad and the Honeywell DT8050V Hardwired DUAL TEC® Motion Sensor are now available for purchase. Today, we will take a quick look at these two exciting new products from Resideo.

The Resideo PROWLTOUCHC Keypad is the exact same device as the Honeywell Home PROWLTOUCH Keypad built for the Honeywell Home PROA7PLUS and the Resideo PROA7PLUSC. The only difference is that the Resideo PROWLTOUCHC says "Resideo" across its front. This is instead of "Honeywell Home", which is shown across the Honeywell Home PROWLTOUCH. If you couldn't guess, the C at the end of PROWLTOUCHC is used to indicate Commercial. It seems Resideo doesn't want the phrase Honeywell HOME written across the front of a keypad built for commercial use. The company has made similar variants for other products recently. Truly, these keypads are exactly the same, and you can use them in-place of each other without issue. If you are a homeowner needing a touchscreen keypad for your PROA7PLUS, and you prefer your keypad to read "Resideo" instead of "Honeywell Home", then you can certainly use the PROWLTOUCHC instead of the PROWLTOUCH. Even though the PROWLTOUCHC is technically the commercial version, it will still work fine in a home. Likewise, if you are a business owner and you like "Honeywell Home" more than "Resideo", then feel free to use the residential PROWLTOUCH model. It may seem a bit silly, but that's the only difference - whether your keypad says Honeywell Home or Resideo. If you prefer Resideo, well then the PROWLTOUCHC is now here!

The other exciting new product from Resideo is the Honeywell DT8050V DUAL TEC® Motion Sensor. This sensor is a direct replacement for the Honeywell DT8050, which has been discontinued. We're still not entirely sure what differentiates the DT8050V from the DT8050. But if you were considering the DT8050, well you should now look into the DT8050V instead. Just like its predecessor, the new DT8050V is a DUAL TEC® motion sensor that utilizes both passive infrared (PIR) and microwave detection. By putting both these detection methods to use, false alarms can be prevented. The sensor will only alert the system if both PIR detection and microwave detection are triggered. Much like most other wired motion sensors, the DT8050V uses a 4-wire connection with the panel. Two (2) wires are for the zone, and the other two (2) are for power. There is another pair of terminals that can be used for a normally closed tamper output, but the use of a tamper circuit is optional. You can use the sensor at pretty much any standard (non-Polling Loop, non-Addressable) wired zone. It's great for use on a Honeywell VISTA System, a DSC PowerSeries NEO, an Interlogix Wired System, and much more. This Dual Tec motion sensor can serve as an excellent long-term addition to your wired system!

If you have any questions about the new Resideo PROWLTOUCHC or the Honeywell DT8050V, contact us via email at support@alarmgrid.com. We're here to help you from 9am to 8pm ET M-F. We look forward to hearing from you!

The security industry is in a peculiar spot as of early 2021. Almost every manufacturer has a major question right now. Today, we thought it would be helpful to take a look at current industry questions and share our thoughts. These are the biggest questions for each security manufacturer.

Resideo: Can the PROA7PLUS regain the trust of DIY users?

The decision by Resideo to initially release the ProSeries 7" All-In-One Panel, also known as the PROA7PLUS, without end user programming is something that we still wholeheartedly disagree with. At the time of this writing in early February, the system still does not support local programming. Many DIY users have already jumped ship and switched to systems that leave them empowered, rather than at the mercy of their monitoring providers.

By all accounts, people love the PROA7PLUS System. It has an extremely attractive design, and it is loaded with great features that help it stand-out in a highly competitive market. But there are more users each and every day who instead choose a different option so that they can perform their own programming. It's funny to think that this same company was once seen as the champion of DIY security systems, as their Honeywell LYNX Touch and Honeywell Lyric Systems definitively proved that an end-user could easily install and program their alarm system on their own and save huge amounts of money.

Resideo says that local end-user programming will eventually be made available for the PROA7PLUS, and we are eagerly awaiting this update. But with an increasing number of users switching to manufacturers who never abandoned the concept in the first place, we have to wonder if it will be too little too late?

Qolsys: Is the IQ Hub a mistake?

When I think about any given company in the security industry, I usually start by considering where they are right now, and also where they are going. For years now, Qolsys has been riding the wave of their IQ Panel 2, and later their IQ Panel 2 Plus. No matter how you slice it, the IQ Panel 2 has been a highly successful security system. So when we first learned about the IQ Hub, which was nearly two and a half years ago, our initial reaction was excitement, followed by us scratching our heads, and then us oddly trying to block it from our memories. You can read more about our predictions regarding the IQ Hub here.

Every clue associated with the IQ Hub suggests that its purpose is to serve as a lower entry point, a "budget" system, if you will, in relation to the Qolsys IQ Panel 2 Plus. And while that's not inherently a bad thing, it's just that we're not really sure if the IQ Panel 2 Plus needs a lower entry point. If there ever was a true "one-size-fits-all" security system, then the IQ Panel 2 Plus might very well be that golden child. Additionally, the IQ Panel 2 has become the very "face" of Qolsys, and the company wouldn't have it any other way. Their premier system is well-known for being sleek, easy to operate, and extremely versatile.

Then you bring in the IQ Hub, and well, from aesthetics alone, it looks like an ugly stepchild. Pair that with the fact that we have now gone two and a half years with no major updates regarding the system, and we're starting to wonder if maybe Qolsys is trying to just sweep this one under the rug and hope we all forget about it? Granted, there was a serious pandemic in the past year, but we haven't even gotten a delay notice. We will give it a few more months before we call this system a total lost cause, but this might be a mistake that never sees the light of day. Or maybe it will make a big splash at a certain security tradeshow in the summer? Crazier things have happened.

2GIG: Is the 2GIG Edge a Hail Mary attempt?

It's no secret that Nortek, the parent company of 2GIG, is going all-in on their 2GIG Edge System. The associated website is bold, and the campaign surrounding the system seems to be far more aggressive than anything we have previously seen out of the company. If we're being honest though, 2GIG seems to be acting a bit wild right now. They're trying very hard to draw up hype for the Edge with "giveaways" and by posting particularly bold quotes from the system's beta testing cycle.

It kind of makes us wonder - why is 2GIG acting with such urgency? Not to mention, they tried to discreetly push back the system's "countdown timer" by a few weeks, as if nobody would notice. Meanwhile, behind closed doors, the company has just axed the only remaining touchscreen keypad option for their current flagship system. And speaking of that current flagship system, the 2GIG GC3e was only released less than two (2) years ago. Now they're already trying to generate hype for a new system?

We still haven't even asked why 2GIG feels the need to be so "artsy" and "revolutionary" with their Edge website. Why not just show us a full image of the panel and list some important features? That would be more helpful than telling us that we have "Reached the Edge", whatever that means. Actually, they're correct. I have reached the edge of my patience.

All of this seems fishy to me. 2GIG is desperate here. And to be fair, the panel looks like it has some great features. There is no reason why the Edge can't be a roaring success. We have always appreciated the exceptional build-quality associated with 2GIG Alarm Panels. And now it looks like 2GIG will finally have an option with all the fancy bells and whistles of their competition. Think a feature-packed system like the Qolsys IQ Panel 2 Plus, but with better build quality. If all goes well, then the Edge should serve 2GIG very well for many years to come. But we also get the vibe that this might be a do or die situation for 2GIG.

DSC: Are the days of DSC Residential Security Systems gone?

When we talk about DSC these days, it's usually for the PowerG Sensors that have become the go-to option for IQ Panel 2 Plus users. The only time a DSC Security System is brought up is if it's a commercial user considering a hardwired DSC PowerSeries NEO or DSC PowerSeries PRO. But while DSC is still highly regarded for its commercial security system offerings, its residential offerings are non-existent.

The DSC Iotega is a total flop of a system, and we can't imagine it ever being relevant. That's really no surprise, as the Iotega basically mirrors the Honeywell Lyric Gateway, which had its own product life cut short due to its poor performance. You will still come across DSC Impassa Systems in the field, and many users opt to upgrade them and extend their useful life. But really, nobody is actively seeking out a brand-new DSC Impassa to build around.

Every time we look at DSC, it just seems like they are inching closer to the likes of Napco and Bosch and becoming exclusively known for their commercial and industrial offerings. Again, it makes sense. Now that both Qolsys and DSC are under the Johnson Controls banner, the divide seems clearer than ever. Qolsys is for residential and small business applications, and DSC is for larger commercial and enterprise applications. Maybe a few of you out there have a fond memory of working on a DSC Impassa System. But we can't picture a new DSC System entering the residential market anytime soon.

Got your own alarm system questions? You can send them to us at support@alarmgrid.com. We're here to check your emails from 9am to 8pm ET M-F. This is also a great email to use if you are wanting to learn more about how you can get started with Alarm Grid monitoring services. We look forward to hearing from you!

We have learned that there is a new firmware update available for Alarm.com Honeywell VISTA SEM Communicators. Firmware Upgrade Version 1.61 is a free over-the-air (OTA) upgrade to ensure that SEM VISTA Panels running 187h or 187i firmware and 1.60 gateway firmware have the newest features.

In order to receive Firmware Upgrade Version 1.61, it must be pushed down manually by your alarm monitoring company. Your Honeywell VISTA Alarm System must be in a disarmed state in order for the update to go through. It is recommended that the system be kept in a disarmed state while the upgrade is completed. The entire process should take roughly 20 to 40 minutes. No action is needed while the update is being performed.

If you are an Alarm Grid monitored customer with a Honeywell VISTA System using an Alarm.com SEM Communicator, then you should email us to request the update. The best email to contact us at is support@alarmgrid.com. This is also a good email to use if you have a Honeywell VISTA Security System or any other alarm system that you are hoping to get monitored. We're here to check your emails from 9am to 8pm ET M-F. We look forward to hearing from you!

We have some exciting new products from Alarm.com now available on our site. The main highlight is the Alarm.com Slim Line II Doorbell Camera from SkyBell. We also have some great new accessories for the existing Alarm.com ADC-VB770 Doorbell Camera. These products are available now!

The SkyBell ADC-VDB105X (Satin Nickel) and SkyBell ADC-VDB106X (Bronze) refer to the new versions of the ADC-VB105 and ADC-VDB106. You may recall these as the "Slim Line" versions of the Alarm.com SkyBell Video Doorbells. The new models retain all of the existing features, while also offering some general improvements. While officially being titled as "SkyBell" devices, they are more commonly referred to as the Alarm.com Slim Line II Video Doorbell Cameras.

Some of the highlights for the Alarm.com Slim Line II Doorbell Cameras include their adjustable 720p recording resolution, their 1.3 MP full-color video camera, two-way voice functionality, WIFI connectivity, a 170° horizontal and 110° vertical field of view (FoV), IR night vision, an IPX4 weather-resistant rating, adjustable PIR sensitivity, real-time alerts, automation rules, an integrated battery heater for seamless operation in cold weather, doorbell-triggered and motion-triggered clips, and much more.

Since these are SkyBell devices, you can technically add one (1) of these devices to your Alarm.com account, even if you do not have true video monitoring service. If you do this, then you will be restricted to only one (1) SkyBell Doorbell Camera, along with 400 monthly clips and 400 total clips. This is a great option if you have an Alarm Grid Gold Plan, and you don't want to upgrade all the way to an Alarm Grid Platinum Plan for true video surveillance. More information can be found in this FAQ covering Alarm.com Clip Limits. Please note that if you want to use additional video devices or increase your clip limits, then you will need to upgrade to a full video monitoring plan. If you use one of these devices with a true video monitoring plan, such as an Alarm Grid Platinum Plan, then the doorbell will just count toward your regular Alarm.com Camera limits, as well as your Alarm.com Clip limits. Also keep in mind that since these are Alarm.com SkyBell models, they should not be used with any interactive platform outside of Alarm.com. They should also not be used with the native SkyBell App. Attempting to use one of these devices with the SkyBell App may make the camera completely incompatible with Alarm.com.

In addition to the Alarm.com Slim Line II Video Doorbell Cameras, we are also now offering several new doorbell camera accessories. These accessories are not for the new Alarm.com Slim Line II Doorbell Camera, but rather they are for the existing Alarm.com ADC-VDB770 Doorbell Camera. This is the "higher-end" doorbell camera that we began offering late last year. It represents the ultimate option for Alarm.com users who are looking for the very best doorbell camera available.

The new accessories for the ADC-VDB770 include:

• ADC-VDBA-COVER - Touchless Doorbell Cover that lets guests know to not touch the video doorbell. Used in conjunction with the Video Doorbell Mat.
• ADC-VDBA-MAT - Video Doorbell Mat that lets guests know to activate the camera by standing on the mat. Used in conjunction with the Touchless Doorbell Cover.
• ADC-VDBA-PSU-PD - Video Doorbell Wall Power Supply Kit that is used if there is no existing chime circuit, or if the chime circuit is incompatible. Can be used with or without a power module. Device is rated at 16 Volts DC, 1.25 Amps, or 20 Watts.
• ADC-VDBA-TC - Temperature Collar Accessory that allows the doorbell camera to be safely used in temperatures as low a -40°F. Can be used with or without the Wall Mounting Plate.
• ADC-VDBA-WP - Wall Mounting Plate that hides blemishes such as missing paint or screw holes. Goes in-between the wall and the doorbell camera. Dimensions are 5.43"L by 3.43"W.

If you have any questions about the Alarm.com Slim Line II Doorbell Camera or any of the new accessories for the ADC-VDB770, please email our support team at support@alarmgrid.com. That is also a good email to use if you are interested in starting new alarm monitoring service with Alarm Grid. We're here to answer your emails from 9am to 8pm ET M-F. We look forward to hearing from you!

We have learned that Verizon has confirmed the sunset date for their CDMA Network for December 31, 2022. This is Verizon's equivalent of the 3G Sunset. Anyone with a security system using a Verizon CDMA Communicator is urged to upgrade to LTE ASAP to avoid monitoring service disruptions.

The 3G Sunset has been covered extensively on the Alarm Grid Blog. It refers to the phasing-out of old 3G and equivalent communicators, in favor of newer technology, specifically LTE. The Verizon CDMA Network is the Verizon equivalent of a 3G Network. While AT&T is known to be shutting down their 3G Network after January 31, 2022, the Verizon CDMA Sunset date it a bit later at December 31, 2022. While there was earlier confirmation by Resideo for the CDMA shutdown date, this time the confirmation is directly from Verizon themselves.

In preparation for this major event, Alarm Grid has been encouraging users to replace their old 3G and CDMA Communicators with newer LTE communicators. Users are strongly advised to upgrade to LTE as soon as they can. While it's understandable to wait until the last minute, especially if money is tight, you should realize that many other users will also try to wait until the final opportunity. Our support staff is limited, and we cannot upgrade everyone all at once. If you put-off the required upgrade as long as possible, then there's a chance you might get left behind at the deadline. Our goal is to prevent that from happening and ensure that all Alarm Grid customers with cellular monitoring service make a seamless and undisrupted transition.

We know that the 3G Sunset might still be a bit confusing, and you might still have some questions. That's okay, because we're here to help you. If you aren't sure about the LTE communicator replacement options available for your system, then you may want to check this post for some further assistance. If you have recently purchased a new LTE communicator for your system, and you need us to activate the unit, then head on over to the Alarm Grid Communicator Replacement Portal so that you can choose a time that works for you. And if you have any other questions, or if you are still confused about the 3G and CDMA Sunset, please email our support team and security system experts at support@alarmgrid.com. We're here to answer your emails from 9am to 8pm ET M-F. We look forward to hearing from you!

DSC PowerSeries NEO users should be pleased to learn that a new firmware update is available for their system communicators. Firmware Upgrade Version 191a offers improvements for Over-The-Air (OTA) connectivity and stability improvements. It also corrects some minor issues that were present.

Firmware Upgrade Version 191a is applicable to both DSC PowerSeries NEO and DSC PowerSeries PRO Systems. For DSC PowerSeries NEO users, the firmware update is technically optional, but still recommended. In order to receive the update, you must have it pushed down manually to your alarm panel from the Alarm.com servers. Assuming that you have internet connectivity set up for your PowerSeries NEO Alarm System, you should not incur any fees as part of the updating process.

Alarm Grid monitored customers with PowerSeries NEO Security Systems can request the update by emailing support@alarmgrid.com. We will work on pushing the update down to your panel at our earliest convenience upon receiving your request. This is also a great email to use if you have any further questions about alarm systems, or if you are interested in starting new monitoring service with Alarm Grid. Remember that we are here to check your emails from 9am to 8pm ET M-F. We look forward to hearing from you!

A day after announcing the impending discontinuation of the ADC-SVR122, we bring more news of a product being discontinued without a replacement. This time, it's the 2GIG SP1 Touchscreen Keypad for the 2GIG GC3 and 2GIG GC3e. This leaves the GC3 and GC3e with no touchscreen keypad option.

This time, Nortek, the parent company of 2GIG, declined to give a reason for the discontinuation of the 2GIG SP1. All we know is that it's gone. It was very sudden and unexpected. And since the other touchscreen keypad option for the GC3 and GC3e, the 2GIG SP2 was discontinued late last year, users of the GC3 and GC3e are now left without an ideal secondary touchscreen keypad option.

With the highly anticipated 2GIG Edge set to release soon, it's possible that 2GIG will release a fancy new cutting-edge keypad for that system. Interestingly, a look at the 2GIG Edge Website, shows that its release has been pushed by roughly three (3) weeks. We're now anticipating a release date of mid-to-late March for the 2GIG Edge. No word on how the 2GIG Edge release will affect the existing 2GIG GC3e, but given that Nortek isn't bothering to provide the system with a secondary touchscreen keypad option, our guess is that the days for the 2GIG GC3e are numbered. Again, total speculation, but that's our best guess.

As for existing 2GIG GC3 and GC3e users who want a viable alarm keypad for their systems, the 2GIG PAD1-345 remains on the market. The 2GIG PAD1-345 is a numeric touchpad keypad without a display screen. While primitive, it is a good keypad for basic arming and disarming functionality. If you want to set up a dedicated secondary keypad by a back door, a garage door, a master bedroom, or any other location where you want to control your security system, the 2GIG PAD1-345 is currently the best option for GC3 and GC3e users.

If you have any questions about the discontinuation of the 2GIG SP1, the impending 2GIG Edge release, or if you are interested in starting new Alarm Grid monitoring service, please email us at support@alarmgrid.com. We're here to check your email from 9am to 8pm ET M-F. We look forward to hearing from you!

We have learned that Alarm.com is planning to discontinue their popular residential streaming video recorder device, the Alarm.com ADC-SVR122. This device is used to store security camera footage so that it can be accessed locally at the ADC-SVR122 or remotely through the Alarm.com servers.

For now, Alarm.com recommends using their Onboard Recording feature as an alternative to using a dedicated streaming video recorder (SVR) device. The Alarm.com Onboard Recording feature allows you to store encrypted 24/7 recording footage locally onto a MicroSD card. It requires a compatible Alarm.com Camera, which includes the ADC-V515, ADC-V523, and ADC-V723. You may recall that these three (3) cameras also represent our current Top Picks for Alarm.com Security Cameras. You will also need the feature added to your Alarm.com account, as well as a compatible SD card. So make sure to your alarm monitoring company enables this feature. The SD card can be 256 GB maximum, and we have some compatible options listed below.

• Micron Industrial Memory Cards
• SanDisk High Endurance
• WD Purple Micro SD Cards

Alarm.com will also still offer the Alarm.com ADC-CSVR126 Streaming Video Recorder. This product, while being built to handle the needs of a commercial location, accomplishes essentially the same thing as the ADC-SVR122. It supports up to sixteen (16) total cameras, and it comes in 2 TB and 12 TB storage options, with the possibility of being upgradable to 16 TB storage. While this is honestly a bit of overkill for most residential applications, it does represent an option if you require a streaming video recorder for your Alarm.com Cameras.

For now, the Alarm.com ADC-SVR122 will remain available for purchase in the 500 GB storage variant only while supplies last. Once we run out of stock, it will no longer be available. If you are an Alarm Grid monitored customer wanting to set up the Onboard Recording feature, or if you are interested in starting new alarm monitoring service with Alarm Grid, send us an email at support@alarmgrid.com. We are here to receive your emails from 9am to 8pm ET M-F. We look forward to hearing from you!