Alarm.com ADC-SWM150 Smart Water Valve and Meter - Data Sheet

Smart Water
Valve+Meter
Data Sheet
www.alarm.com
© 2020 Alarm.com. All rights reserved. 200625
Overview
The Smart Water Valve+Meter uses
cutting-edge technology to monitor your
water usage and detect leaks of any size,
anywhere in your home. Whether it’s a
burst pipe or a dripping faucet, have
peace of mind that your home is protected
against water damage. Set up rules to
automatically shut off your main water
supply when a leak is detected by the
Smart Water Valve+Meter or water
sensor (sold separately, not required).
Get informed about your water
consumption and take action to
lower your water usage.
Features
• Whole-home leak detection
• Water consumption monitoring
• Automatic water damage prevention
• Open/close water valve remotely
• Automatically shut off water when
paired with a water sensor
• Modular design
• Z-Wave Plus communication
• Z-Wave S2 security protocol
* Additional parts required: Installation will
require additional fittings to connect the
ends of the valve to the pipe. The type of
fittings needed will depend on the existing
pipe size, material, and threading type as
well as applicable plumbing codes.
Specifications
Power:
100-240 VAC (50/60 Hz)
Operating Temperature:
14°F to 185°F
(-10°C to 85°C)
Communication:
Z-Wave Plus
Restrictions:
For indoor use only
Valve:
Size: 1” Threads: Male NPT
Potability: Conforms to NSF/ANSI 61 and 372
standards for potability
Control Unit Dimensions:
2.75 x 4.0 x 1.25”
(6.99 x 10.2 x 3.18 cm)
Meter and Valve Dimensions
(With Enclosure):
11 x 5.75 x 3.75” (27.9 x 14.6
x 9.53 cm)
Actuator and Valve Dimensions:
2.0 x 4.5 x 3.75” (5.08 x 11.43 x 9.53 cm)
Power supply cable length:
19.7’ (6 m)
Plumbing certi�ications:
ICC-ES-PMG (compliance with
NSF 61 and NSF 372)
Massachusetts Accepted Plumbing
Products Registry
ADC-SWM150
Included accessories
• ADC-SWM150 Control Unit
• Brass valve and meter
• Plastic enclosure
• Actuator
• Mounting plate
• Drywall anchors & screws (x2)
• Cable ties (x3)
• Power adapter
• Installation guide