Alarm.com Slim Line 2 Doorbell Camera Quick Start Guide - Dated 2020

Video Recording Rules
Use your mobile app to choose which events trigger your Doorbell
Camera video clip recordings:
Push Notifications
Use your mobile app to set up instant alerts:
Visit
alarm.com/doorbell
for installation instructions.
To respond to doorbell notifications even faster, check

“Keep me logged in” on your mobile app login screen.
QUICK

TIP
You can view recorded clips on your mobile app and Customer Website.
QUICK

TIP
Motion
Motion
Event Triggered
Button Pushed
Button Pushed
Record when the doorbell button is pushed.
Record when the Doorbell Camera

detects motion.
Record when a sensor in your Alarm.com

system is activated or an alarm is triggered.
Tap on a doorbell notification to open the call screen so you can

see and speak with your visitors.
Be notified when the doorbell button

is pushed.
Be notified when the Doorbell Camera

detects motion.
Slim Line II Doorbell Camera LED REFERENCE GUIDE
QUESTIONS?
Contact your installer or visit
www.alarm.com/doorbell
for helpful
videos and a full LED reference guide.
If you are a professional installer, visit
answers.alarm.com
.
Troubleshooting
Orange
| Rapid double blink
Blue
| Rapid double blink
Requires Attention
No Wi-Fi connectivity
Check your Internet connection.
Power supply issue
Contact your installer.
Green
| Solid
White
| Solid
Ready and working normally
Use your mobile app or Customer Website to
choose a custom color in place of default green.
In call mode
A call has been initiated or is occurring.
Normal Operation
Wi-Fi Access Point mode
Connect to the camera’s temporary network

and use the mobile app to update Wi-Fi settings.
Power cycle
Reboots the camera.
Factory reset
Use to factory reset the camera.

Deletes all Wi-Fi and configuration information.
Red
|
Green
| Alternating blink
Push & hold ~
60 sec
until blinking
Blue
| Blinking
Push & hold ~
70 sec
until blinking
Yellow
| Blinking
Push & hold ~
80 sec
until blinking
© 2020 Alarm.com. All rights reserved. 200806