Defaulting SiX, SIXA, and PROSIX Series Devices Guide - Dated 2019

Company Internal

STEPS TO DEFAULT SiX
,

SIXA and PR
OSIX

SERIES DEVICES


Defaulting a device may be necessary
if the
device is

enroll
ed

in

a panel
(paired with a panel)
in a
location that is different than the
intended
panel
,

and the installer does not have access to the
uni
ntended
panel to
delete the sensor.


Each device
provides

visual indicat
ion

showing whether or not it is paired with a controller. This is
described in the table below

for each device
.


The procedure to default each device is primarily the same

(except
fo
r
the keypad and
key fob)
: Open
the device cover, remove the battery, activate the tamper switch, and then reinstall the battery while
the tamper switch is still held down.


For devices other than the SiXFOB, t
his process is available for 24 hours after en
rollment with the

panel
and while the
device remains powered

(battery installed

in sensors; AC power applied at keypad)
.

For
the SixFOB, this process expires after the first 100 transmissions.


PROCEDURES

MODEL

DEFAULT PROCEDURE

PAIRED/NOT PAIRED INDICATIO
N

SiXCT

SiXMINI
CT

SiXGB


1.

Open the cover.

2.

Remove the battery.

3.

Hold the tamper switch down.

4.

Reinstall the battery while still holding
the tamper switch down.


Indicator

Paired

Not Paired

Green LED

slow blink
when tamper
faulted

fast
blinking




SiXSI
REN

SiXS
IRENOD


1.

Open the cover.

2.

Remove the batteries.

3.

Hold the tamper switch down.

4.

Reinstall the batteries while still holding
the tamper switch down.


Indicator

Paired

Not Paired

Green LED

slow blink
when tamper
faulted

fast
blinking




SiX
SMOKE

1.

Open the cover.

2.

Remove the batteries.

3.

Activate the tamper with a magnet.

4.

Reinstall the batteries while still
activating the tamper switch.


Indicator

Paired

Not Paired

Green LED

slow blink
when tamper
faulted

fast
blinking




SiX
COMBO

1.

Open
the cover.

2.

Remove the battery.

3.

Activate the tamper with a magnet.

.

4.

Reinstall the battery while still holding
the tamper switch down.


Indicator

Paired

Not Paired

Green LED

slow blink
when tamper
faulted

fast
blinking




SiXPIR

SiXHEAT

1.

Open
the cover.

2.

Remove the battery.

3.

Hold the tamper switch down.

4.

Reinstall the battery while still holding
the tamper switch down.


Indicator

Paired

Not Paired

Green LED

slow blink
when tamper
faulted

fast
blinking




LKP500
-
EN

(Si
X KEYPAD)

1.

Pres
s the 3 key until the advanced menu
is displayed

2.

Scroll until
“
Default
”

is displayed.

3.

Press select.


Indicator

Paired

Not Paired

Status icon

slow blink

fast
blinking




SiXFOB

1.

Press and hold the three white buttons
simultaneou
sly for
m
ore than

five (5)


Indicator

Paired

Not Paired

both

LED
s

LEDs
no
t

alternating,
Company Internal

seconds.This process is available for the
first 100 transmissions from the key fob.

blinking


fast

blinking

















SiX
CO

1.

Open the cover.

2.

Remove the ba
tteries.

3.

Reins
tall the batteries while still holding
the
test

switch down.


Indicator

Paired

Not Paired

Green

LED

LEDs no
t

blinking


alternating,
fast
blinking




SiX
C2W

1
.

Open the cover, verify device is powered
on.

2.

Simultaneously press and rele
ase the
c
alibrate

and tamper switch

3.

Reinstall the batteries while still holding
the
test

switch down.


Indicator

Paired

Not Paired

Green

LED

LEDs no
t

blinking


alternating,
fast
blinking




SiXSHOCK

S
IXFLOOD

SiXTEMP

1.

Open the cover.

2.

Remove the b
attery.

3.

Hold t
he tamper switch down.

4.

Reinstall the battery while still holding the
tamper switch down.


Indicator

Paired

Not Paired

Green LED

slow blink
when tamper
faulted

fast
blinking