Total Connect 2.0 Overhead Garage Door Integration - Quick Start Guide - Dated 07/2023

Overhead Door
Garage Door Openers
*
can now be controlled with Resideo Total Connect 2.0
TM
®
QUICK START GUIDE
Log into your Total Connect App.
1
From the “
Devices
” page, please click the 3 vertical dots in
the top right corner and then select “Add/Remove Devices”.
Select
“Overhead Door”
.
2
3
Before you begin, you must have:
• An Overhead Door
TM
branded Wi-Fi smart garage door opener
• An active Total Connect 2.0 subscription enrolled in the smart home package
Open and close Overhead Door
TM
Garage Door openers
within the Total Connect App. See and manage all devices
inside a single app for simplified control of security and
smart devices.
HOW TO GET STARTED: Resideo Technologies, Inc.
2 Corporate Center Drive, Suite 100
P.O. Box 9040 Melville, NY 11747
Office: 1 800 645-7492
L/TC2OHDQSG/D | KR | 07/23
© 2023 Resideo Technologies, Inc.
All rights reserved
*The Overhead Door
TM
is a
trademark and the Ribbon

logo is
the registered trademark of
Overhead Door Corporation.
For more information
resideo.com
If credentials are correct, you will be prompted to select
which garage doors to enroll, please select all which you
want to bring over.
6
A “
Success
” message will appear, and you will now see the
garage doors in your devices list.
7
You will be prompted with two options:
a.
Select “
Link to Existing Account
” if you currently have an account for your garage door opener in the
OHD Anywhere
®
App, then continue to step #5.
b.
If you do not have an account, select the option “
Add new Account
” to download OHD Anywhere
®
and follow their instructions to setup your Wi-Fi Garage Door Opener. Once completed, please return
to Total Connect 2.0 and follow the steps above to continue with enrollment.
4
You will be prompted to enter your credentials, then click the “
Login
” button.
5
Garage Door Operation
On the Total Connect “
Devices
” page you will see your garage door(s)
with the current door status underneath. Tap the icon on the right to
open or close the door. It’s that simple!
(Please note: Door operation may take a minute depending on your network connection)
How to Remove Device
1. Go to “
Devices
” page inside Total Connect
2. Tab on the 3 dots on the upper corner of the screen
3. Click add/remove Devices
4. Click the Overhead Door
TM
brand icon
5. Log in with your Overhead Door
TM
credentials
6. Deselect the garage door you want to remove from Total Connect
7. You will receive a “
Success
” message and the device will no longer appear inside Total Connect