ADI PRO 0E-SRFMTMG2W

The ADI PRO 0E-SRFMTMG2W is a 2-wire surface-mounted magnetic contact. It has an ingress rating of IP65, which makes it ideal for overhead doors and gates. The 0E-SRFMTMG2W is a normally-open closed loop contact. It has a generous 3.5″ (89mm) departure gap and a 2.95″ (75mm) close gap.

The ADI PRO 0E-SRFMTMG2W has a durable aluminum construction that can withstand the elements. It is completely dust-proof and can withstand water jets from any direction. The 0E-SRFMTMG2W mounts onto the protected side of the door or gate. The magnet which comes mounted to an "L" bracket, mounts to the door or the gate. Be sure that the door or gate can move freely without interference before permanently mounting.

The 36 inch armored cable provides protection and consists of a 2-wire cable. This would connect to the zone wires from the alarm panel. Alarm Grid recommends using an End-of-Line Resistor (EOLR) for the best protection. The EOLR can help to also determine issues with damaged or cut zone wiring.

ADI PRO also makes a 3-wire version. The ADI PRO 0E-SRFMTMG3W has the capability of wiring in a normally-open or normally-closed loop configuration. ADI PRO also makes a 2-wire and 3-wire version that mounts directly to the floor next to the overhead door. The ADI PRO 0E-SRFMTOD2W is a 2-Wire overhead garage door sensor, while the ADI PRO 0E-SRFMTOD3W is a 3-Wire overhead garage door sensor. They complete their lineup with the ADI PRO 0E-TRKMTOD, which is a track-mounted overhead garage door sensor.

Use a wired to wireless converter to turn your 0E-SRFMTMG2W into a wireless sensor. Be sure to get a converter that is compatible with your specific alarm system. Some will convert a single zone and some will convert multiple hardwired zones with one unit.

ADI PRO delivers professional, quality products which have been fully tested. They're backed by a competitive warranty. The warranty varies according to the specific product. ADI PRO’s products meet or exceed industry standards and are sure to meet yours.

Specifications

• Device Type: Hardwired Door and Gate Sensor
• Installation Type: Sensor mounts to the protected side of the overhead door or gate, magnet mounts to the overhead door or gate
• Wiring: Connected 36″ (91cm) 2-wire enclosed in an armored cable
• Electrical Configuration: Normally Open (SPST) closed loop
• Close Gap: 2.95″ (75mm)
• Departure Gap: 3.5″ (89mm)
• Contact Power Rating: 7.5W/400mA max (switching)
• Materials: Switch - Aluminum, Contacts - Rhodium-plated iron nickel, Magnet - Rare-earth neodymium
• Ingress Protection: IP65
• Sensor Dimensions: 3 x 1 x 1/2" (76 x 25 x 13mm)
• Magnet Dimensions: 3 x 1 x 1/2" (76 x 25 x 13mm), Bracket - 4 7/8 x 2 x 3/4″ (73.2 x 50.8 x 19mm)
• Operating Temperature: -15°-160°F (-25°-70°C)
• Warranty: One (1) Year