2GIG SMKT8 and SMKT8e Smoke/Heat/Freeze Sensor - Data Sheet

Smoke Heat Freeze Detector
2GIG-SMKT8E-345 (eSeries with encrypted signal)
2GIG-SMKT8-345 (non-encrypted signal)
The 2GIG Smoke Heat Freeze Detectors are designed to recognize smoke from
common synthetic materials and decrease nuisance alarms from everyday cooking.
Using advanced detection algorithms and a sophisticated photo-electric optical
sensor, these two detectors meet the new UL standards for the year 2020*.
Please visit
2GIG.com
, or contact your local Sales Manager.
The new 2GIG Smoke Heat Freeze Detector has been designed to detect fire issues

earlier, providing a more accurate and timely notice in the event of smoke or fire.
Key Features:
• Meets new UL217 8
th
edition and

UL268 7
th
edition requirements.
• Designed to recognize smoke from

some synthetic materials.
• Monitors and reports on excessive

temperature variations.
• Optical smoke detection chamber for

improved smoke detection.
• Rate of Rise alert is sent to the panel and

a siren is triggered once the room temperature

is 104
̊
F and the temperature rises 15 degrees
or more in one minute.
• Extreme high/low temperature alerts.
• Long-lasting battery with projected life

of 10 years.
• 2-year product warranty.
* See reverse for new UL standards 2GIG SMOKE HEAT FREEZE DETECTOR SENSOR
SPECIFICATIONS & TECHNOLOGY
2GIG SMOKE HEAT FREEZE DETECTOR SENSOR SPECIFICATIONS
Ordering Part Number
2GIG-SMKT8-345, 2GIG-SMKT8e-345
Wireless Signal Range
350 ft (106.7m), open air with Wireless Control Panel
Transmitter Frequency
345 MHz
Compatibility
2GIG-SMKT8-345 works with 2GIG Panels
2GIG-SMKT8e-345 works with GC2e and GC3e Panels only
Supervisory Interval
70 minutes
Dimensions (D x H)
4.7 x 1.8 inch (120 x 46 mm)
Weight
0.46 lbs
Audible Alarm
> 85dB (A) at 10ft (3m) minimum
High Temperature Level
134 ̊F
+
⁄- 4 ̊F
High Temperature Rate of Rise
Temperature above 104 ̊F and increases 15 ̊F or more in one minute
Low Temperature Level
40 ̊F
+
⁄- 4 ̊F. Reset at 45 ̊F
+
⁄- 4 ̊F
Operating Temperature
-40° to 100°F (4.4°C to 37.8°C)
Operating Rel. Humidity
15% to 95%, non-condensing
Batteries
2 x CR123A
Regulatory Listing
UL268 7th Edition, CAN/ULC S529 7th Edition, CSFM
Projected Battery Life
10 years
Warranty
2 years
2GIG is a registered trademark of Nortek Security & Control LLC. All Rights Reserved.
© 2019 Nortek Security & Control LLC.
P/N: 411852405 - Rev B
5919 Sea Otter Place, Suite 100 • Carlsbad CA 92010 • 760.438.7000 • 800.421.1587
nortekcontrol.com
Specification and availability subject to change without notice
Traditional smoke detectors trigger an alarm when any smoke density reached a specific level, which could
have just been normal cooking events. The 2GIG Smoke Heat & Freeze Detector uses advanced algorithms
and a sophisticated optical chamber to improve the detection of smoke particles created

by some synthetic materials, separate from organic smoke associated with normal cooking events.

The new technology is designed to trigger an alarm faster when synthetic smoke is detected versus

smoke from cooking, adding to safety and peace of mind.
UL 217 & 268 Smoke Alarm Standards bring 250 new technological changes to traditional smoke detection.
Meeting the new UL standards, the 2GIG

Smoke Heat & Freeze Detector provides increased performance
and better detection of smoke, including smoke from common synthetic materials found in home furnishings.
These synthetic materials generally have a faster burn rate reducing escape time from an average of 17
minutes to 3-4 minutes (UL Press Release – February 2018).