Alarm.com ADC-VDB780B - Charging the Battery
Related Products
Related Categories
Document Transcript
Charge the ADC-VDB780B battery
The
Alarm.com Wireless Video Doorbell (ADC-VDB780B) battery can be charged using a
5V/1.5A USB wall charger
and the supplied charging cable.
To charge the ADC-VDB780B battery:
Note
: A fully depleted battery takes
approximately 7 hours to charge.
1.
Unlatch the bottom of the mount.
2.
Remove the VDB780B from the mount.
3.
Separate the battery pack from the VDB780B body.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A...
Updated: Tue, 14 Mar 2023 21:29:59 GMT
1 4.
Plug the supplied micro USB cable into the battery pack.
5.
Plug the USB end of the cable into a USB wall charger and insert the charger into an outlet.
6.
The charging LED, located on the top of the battery pack, will be solid orange while the device is charging. The
charging LED will turn solid green when charging has completed.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A...
Updated: Tue, 14 Mar 2023 21:29:59 GMT
2 Charging state LED guide
Mode description
Top LED Behavior
Button LED behavior
Charging
The battery pack is plugged in and
charging.
Solid orange
On button press
Solid green =
>75% charged
Solid yellow =
75%-20% charged
Alternating red and blue = <20%
charged
Fully charged
The battery pack is fully charged.
Solid green
On button press
, solid green
Failure charging
The battery pack stopped charging
because the device was plugged in
too long. This may signal that there
is an issue with your battery pack.
Remove the charging cabled and re-
attempt charging after an hour. If you
see the same behavior, please
contact your provider.
Alternating orange and green
Alternating red and white
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A...
Updated: Tue, 14 Mar 2023 21:29:59 GMT
3 Mode description
Top LED Behavior
Button LED behavior
Operational temperature range for
charging exceeded
The battery pack's internal
temperature is either too hot or
too
cold. Please charge the battery pack
in a room-temperature environment.
Solid green or solid orange
Alternating red
and yellow
or
Alternating red and white
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A...
Updated: Tue, 14 Mar 2023 21:29:59 GMT
4
- Uploaded