Alarm.com ADC-VDBA-PSU-PD Overview - Dated February 4, 2021

How does the Video Doorbell Wall Power Supply Kit work?
The Video Doorbell Wall Power Supply Kit (ADC-VDBA-PSU-PD) is a DC plug-in power supply rated at 16V, 1.25A
(20W). The Video Doorbell Wall Power Supply Kit is designed to easily power the ADC-VDB770 when not using an
existing chime circuit. This supply can be used for installations where there is no existing wiring or where the existing
setup is incompatible.
Important
: The Wall Power Supply Kit should only be installed when no wired chime is used in the circuit.
Installation and wiring
Required materials
•
A
10 W / 10 Ohm
resistor (or flameproof 5W / 3.9 Ohm
resistor without a power module)
•
Wires for the power supply
Wiring diagrams
Power module installed
No power module
Caution: Power will run through the resistor at all times
using this configuration. You must use a flameproof
resistor and ensure it is thermally isolated in the
installation.
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Video_Doorbell_(ADC-...
Updated: Thu, 04 Feb 2021 18:11:00 GMT
1