Alarm.com ADC-W100 - Data Sheet
Related Categories
Document Transcript
PoE to Wi-Fi Bridge (ADC-W100) - Data Sheet
Introduction
The ADC-W100 makes it easy to install any Alarm.com
Power over Ethernet (PoE) camera by eliminating the
need to run cable wiring throughout a home or business.
The ADC-W100 plugs into any wall outlet and provides
the PoE camera with both electrical power and secure,
reliable Wi-Fi connectivity.
Specifications
Ethernet Interface
10/100 Ethernet
Wi-Fi
IEEE 802.11 b/g/n single band WLAN
Power over Ethernet
IEEE 802.3AF
Wi-Fi Security
WEP, WPA, WPA2
Dimensions
3 x 4.5 x 1.7'' (75.7 x 113.5 x 43.1 mm)
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/PoE_to_Wi-Fi_Bridge_ADC-W100/PoE_to_Wi-Fi_Bridge_(ADC-W100)_-_Data_Sheet
Updated: Wed, 10 Apr 2019 18:33:46 GMT
1 Operating temperature
0° to 40° C
Button
description
Button
Description
WPS
To pair with a router via WPS (Press and hold for
3
seconds)
Reset
Reset to Factory Default (press and hold 10 seconds)
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/PoE_to_Wi-Fi_Bridge_ADC-W100/PoE_to_Wi-Fi_Bridge_(ADC-W100)_-_Data_Sheet
Updated: Wed, 10 Apr 2019 18:33:46 GMT
2 LED description
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/PoE_to_Wi-Fi_Bridge_ADC-W100/PoE_to_Wi-Fi_Bridge_(ADC-W100)_-_Data_Sheet
Updated: Wed, 10 Apr 2019 18:33:46 GMT
3 LED label
LED status color
Description
No light
Power off
Power
Solid Green
Power on
No light
Wi-Fi not in use
Solid Green
Wi-Fi connected
Flashing green
Data is being sent over Wi-Fi
WLAN
Solid Red
Wi-Fi connecting or connection
failed
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/PoE_to_Wi-Fi_Bridge_ADC-W100/PoE_to_Wi-Fi_Bridge_(ADC-W100)_-_Data_Sheet
Updated: Wed, 10 Apr 2019 18:33:46 GMT
4 Flashing red
WPS pairing process
Flashing orange
Weak Wi-Fi signal
Flashing red/green
Poor Wi-Fi connectivity
No light
No data transmission on data port
Data
Flashing green
Data is being sent over data port
Camera
No light
No camera detected on the camera
port
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/PoE_to_Wi-Fi_Bridge_ADC-W100/PoE_to_Wi-Fi_Bridge_(ADC-W100)_-_Data_Sheet
Updated: Wed, 10 Apr 2019 18:33:46 GMT
5 Flashing green
Camera is connected to the port
Note
: It is common to see the
Camera LED go between a solid
green and a quick rapid flicker/blink.
This is expected behavior.
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/PoE_to_Wi-Fi_Bridge_ADC-W100/PoE_to_Wi-Fi_Bridge_(ADC-W100)_-_Data_Sheet
Updated: Wed, 10 Apr 2019 18:33:46 GMT
6
- Uploaded