Honeywell 5800PIR-OD Data Sheet
Related Products
Related Categories
Document Transcript
5800PIR-OD
OUTDOOR WIRELESS MOTION DETECTOR
The 5800PIR-OD is a AA lithium battery powered wireless outdoor motion detector intended for use with Honeywell alarm systems that support 5800 Series wireless devices. The 5800PIR-OD is an ideal solution for outdoor sensing needs in difficult to wire locations— avoiding the costs and time to trench hardwired solutions. It’s perfect for both residential (activity monitors, e-mail alerts, turning on video cameras) and commercial (protecting copper theft, utility and electrical
substations, cellular sites, commercial buildings, car lots and more) applications. The 5800PIR-OD consists of two passive infrared (PIR) sensors that must both be tripped to declare an alarm, providing immunity to false alarm sources, pets and other animals. These sensors can be adjusted to alter the detection range. The transmitter can send alarm, tamper and low battery condition messages to the alarm panel.
FEATURES
• Discriminates both large and small animals to reduce false alarms • Adjustable range patterns from 7' up to 40'. The 90º pattern can also be adjusted throughout a 180º field of view by simply swiveling the housing. • Battery saving feature allows you to select five seconds of inactivity (for higher security requirements or where up-to-date information is critical) or 120 seconds of inactivity after alarm (for initial notification) • Immune to bright lights from head lamps, sunlight and other light sources that typically generate false detections • Full Supervision – The 5800PIR-OD is fully supervised to monitor for low battery, case tamper and trouble conditions • Versatile Mounting – Whether you choose to affix the detector to a wall or a fence post, mounting is simple with the enclosed hardware
side view
• Tamper Protection – The detector has a built-in tamper switch that can communicate back to the control panel in the event it is removed from the wall
PBC open view
5800PIR-OD
OUTDOOR WIRELESS MOTION DETECTOR
SPECIFICATIONS:
• Range: - Adjustable up to 40 feet (12 meters) • Pattern: - 90º consisting of 13 zones. The pattern can be adjusted in 15º increments from center up to 45º in either direction. • Mounting Height - 2.7 – 4.0 feet (0.8 – 1.2 meters) • Mounting Configuration - Wall or pole mount (included) • Detection Method - Dual Passive Infrared (PIR) • Warm-up Time - Two Minutes • Power Source: - Four 1.5V AA lithium batteries (included) • Battery Saving Timer: - Adjustable to 120 seconds or five seconds • Battery Life: - 120 second mode = up to four years - 5 second mode = up to 1.5 years • Sensitivity: - 3.6° F at 2.0 feet/second (2.0° C at 0.6 meters/second) • Detection Speed: 1-5 feet/second (0.3 to 1.5 meters/second) • Alarm Period: - 2.5 seconds • LED Indicator: - Enabled during walk test, disabled for normal operation to save battery life • Dimensions: - Height: 7.8 inches (199mm) Width: 3.2 inches (82mm) Depth: 4.7 inches (120mm) • Operating Ambient Temperature Range: - -4° F to 122° F (-20° C to 50° C) • Operating Humidity Range: - 95% Max • Weatherproof: - IP54 compliant • Accessories Included: - Pole mount kit, screw kit, masking strips • Agency Listings: - FCC, IC
Top view 12 10 5 0
45
o
45o Adjustable
Active detection fingers.
5 10 12 (m) 0 5 45o Adjustable 10 12(m)
45
o
90
o
ORDERING
5800PIR-OD 462 Wireless Outdoor PIR Motion Sensor AA 1.5V Lithium Battery (four per unit)
Automation and Control Solutions Honeywell Security & Communications 2 Corporate Center Dr. Suite 100 P.O. Box 9040 Melville, NY 11747 www.honeywell.com
L/5800PIRODD/D January 2009 © 2009 Honeywell International Inc.
- Uploaded