Honeywell 6280 Software Upgrade - Dated 08/2012

6280s/w Software Upgrade
(NOT FOR TUXEDO!)
The upgrade for 6280s/w is: 4.1.27 Current Upgrade Posted: 08/20/2012

(click here)

This procedure assumes you have a blank SD card inserted in your computer and that you have the ability to unzip or extract the downloaded files. This Software Upgrade can ONLY be applied to 6280s/w Model AUI Keypads. DO NOT INSTALL IN TUXEDO KEYPADS. INSTRUCTIONS FOR USE: 1. Click the link for 6280.exe, Choose to "Save" 2. Once saved, double click 6280.exe. You will be given the option to extract files to C:\Temp\6280. Extract here, or to a directory of your choice. Once the files are extracted, copy them to the SD card, or extract all files from 6280.exe directly to the SD card. 3. Note address of keypad 4. Insert SD card and press the recessed ‘Reset’ button (hidden on the back lower right, behind the message led). Or you can Power down the keypad, insert the SD card and Power up the keypad. 5. Remove SD card when the display shows “REMOVE MMC CARD AND PRESS OK TO RESET THE KEYPAD”. 6. Press ok 7. Select ECP address 8. Press ok if language is English

Honeywell Technical Support • (800)645-7492 • Operating Hours: 8:30am to 8:00pm EST Have a Question? Send an email to Our Technical Support Department! Click on the link Support3@Honeywell.com