Honeywell L3000 Voice Prompt Programming Guide

K9288V1 4/04 Rev. A
$'(0&2/<1;56HULHV
6HFXULW\6\VWHPV

9RLFH3URPSW3URJUDPPLQJ*XLGH
Introduction
In addition to the standard Expert Programming mode, the LYNXR Series features a quick programming mode
that allows you to program the system by responding to a series of voice prompts. The Voice Prompt
Programming Guide provides you with the information required to use this feature.

Voice Prompt Programming Keypad Functions:
The keys shown below are used to navigate through the Voice Prompt Programming Feature.

1. ESCAPE/ OFF key: Used at any
time to exit the current menu and
return to the previous prompt.
2. ADD/ AWAY key: Used to add
sensors, or keys or save data when
entering phone or account numbers.
3. DELETE/ STAY key: Used to
delete a sensor when in the delete
Sensors Menu.
4. SELECT/ AUX key: Used to
confirm a selection.
5. 3 ↑ key: Used to scroll forward
through menu choices.
6. 6 ↓ key: Used to scroll backward
through menu choices.

1 2 3
4 5 6
7 8 9
0 #
*
ESCAPE VOLUME PLAY
DELETE
TEST BYPASS ADD
CODE CHIME
SELECT
RECORD
LIGHTS ON
LIGHTS OFF
STATUS NO DELAY FUNCTION
ARMED READY
OFF
AWAY
STAY
AUX
01009-021-V0
®
5
7
4
3
1
2
6

7. FUNCTION/ # key: Used to repeat a voice prompt. (This function cannot be used while entering phone or account numbers.)
Notes: (1) Keying in any new command will terminate the active voice prompt.
(2) If an irrelevant command is entered LYNXR will generate a long rejection beep and repeat the previous voice prompt.
(3) Phone numbers and account numbers can be left blank by pressing the “ADD/ AWAY ” key without entering any data.
(4) LYNXR automatically saves phone and account number data once all available digits are entered.


ENTERING VOICE PROMPT PROGRAMMING
1. Power-up the control and enter the Installer Code
(4 1 1 2) + 8 8 8.
2. Once you have entered into the Voice Prompt
Programming Mode the system will announce,
“Programming, use ARROWS to scroll choices, press
SELECT to accept, press ESCAPE to quit.”
3. Press the 6 ↓ or 3 ↑ keys to scroll through the
voice menu and follow the instructions provided.
4. The system will announce the following options:
“Add Sensors”
“Delete Sensors”
“First Central Station Phone Number”
“First Central Station Account Number”
“Second Central Station Phone Number”
“Second Central Station Account Number”
“Templates”
“Expert Programming Mode”

5. Follow the directions provided by each voice prompt to
make your selections.

The FUNCTION/ # key can be used to repeat a voice
prompt, as required.
6. When you have completed each programming
procedure the system will return to the Main
Programming Menu.
EXITING VOICE PROMPT PROGRAMMING
1. Once you have returned to the Main Programming
Menu, the system will announce, “Programming use
ARROWS to scroll choices, press SELECT to accept,
press ESCAPE to quit”.
2. Press ESCAPE/ OFF to exit Voice Prompt
programming mode once you have returned to the Main
Programming Menu.
Voice Prompt Programming Procedure
2
Enter Voice Prompt Programming Mode: (Installer Code + 8 8 8). Follow the voice prompts to advance to
the selected item in the Main Programming Menu.
Main Programming Menu
Add Sensors Delete Sensors
First Central Station Phone Number First Central Station Account Number
Second Central Station Phone Number Second Central Station Account Number
Templates

Expert Programming Mode
Program each option as shown below. Use the 6 ↓ and 3 ↑ keys to scroll through the voice menu and follow the voice
prompts to program the LYNXR.
!
The LYNXR will enroll a sensor once the transmitter has been activated twice. The system will confirm the enrollment
following each subsequent activation of the same transmitter.
To Add a Door Sensor

(1) Delay Door Location
Front Basement
Back Sliding
Side Hall
Garage Kitchen
Patio

To add a Window, Motion Detector, or Fire Detection Sensor


(2) Sensor Type (3) Sensor Location (4) Location Modifiers
Window Living room Den Upstairs
Motion Detector Dining room Family Room Downstairs
Fire Detection Bedroom Guest Room First
Bathroom Laundry Room Second
Nursery Utility Room Third
Kitchen Garage Second Floor
Hall Attic Front
Basement
Master Bedroom
Office
Upstairs
Rear
Side


Voice Prompt Programming Procedure
3
To Delete Sensors

To Add an Emergency Pendant


(5) Pendant Type
Medical
Fire
Silent Police
Police

!
When adding wireless keys, wait 5 seconds between transmissions.
To Add a Wireless Key



LYNXR automatically saves phone and account number data once all available digits are entered.
To Add First Central Station Phone Number


!
All four digits of the Central Station Account number must be entered.
To Add First Central Station Account Number


Voice Prompt Programming Procedure

To Add Second Central Station Phone Number


!
All four digits of the Central Station Account number must be entered.
To Add Second Central Station Account Number



Refer to the LYNXR Series Installation and Setup Guide to view the complete set of Template (default table) selections.

To Program a Template (Default Table)



(6) Template selections
Template 1
Template 2
Template 3
Template 4

To Enter Expert Programming Mode
!
Once you have entered the Expert Programming Mode, the [ESCAPE] key can be used to return to the Voice Prompt
Programming mode.



165 Eileen Way, Syosset, New York 11791
Copyright © 2004 Honeywell International Inc.
www.honeywell.com/security


]hM|¶¶N¶|]
K9288V1 4/04 Rev. A