Interlogix TX-E401 - Data Sheet

The TX-E Garage Door Tilt Sensor from Interlogix provides
intrusion detection for garage structures. This sensor can be
mounted on top of any garage door and allows for quick and
easy installation without the need to align a magnet.
The TX-E Series Garage Door Tilt Sensor will transmit an open
and close signal to the panel each time the garage door is
opened or closed. When the alarm panel is armed, if the
garage door opens to a forty-five degree angle, the sensor
goes into an alarm condition that turns on the siren and
initiates a call to the central monitoring station. The TX-E Series
Garage Door Tilt Sensor also features a slow loop response
which eliminates false alarms triggered by garage door
movement due to wind.
OVERVIEW
• Field proven wireless technology
• Case tamper
• Extended operating temperature range
• Slow loop response that eliminates false alarm due to wind
• Replaceable battery with up to 5 years of battery life

(based on usage)
• 2 year warranty
STANDARD FE ATURES

Intrusion
Specifications
Compatibility
Interlogix Learn-Mode panels and receivers
Frequency
319MHz (Crystal based)
Battery
CR123A
Battery Life
5 years, typical
Operating Temperature
-22°F (-30°C) to 120°F (49°C)
Operating Humidity
5-95% non condensing
Weight
2.0 oz.
Dimensions (WxHxD)
3.5 x 1.0 x 0.87 in. (8.89 x 2.54 x 2.20 cm)
Color
White
Approvals
FCC/IC
Ordering Information
TX-E401
Garage Door Tilt Sensor
Specifications subject to change without notice.
© 2016 United Technologies Corporation.

All rights reserved.
All trademarks are the property of their respective owners.
Interlogix is part of UTC Climate, Controls & Security

a unit of United Technologies Corporation.
2016/05 (LI-1705)
interlogix.com
Garage Door
Tilt Sensor
TX-E Series