Qolsys IQ Lightbulb Quick Installation Guide

IQ LIGHTBULB
QUICK INSTALL GUIDE
Power Supply:
120 VAC, 60 Hz
Brightness:
750 lumens
(equivalent to 60 Watt
incandescent light bulb)
Power Consumption:
9 Watts
Color Temperature:
2700K
Bulb Lifetime:
25,000 hour
(equivalent 22.8 years based on 3
hours/day)
Frequency Type: Z-Wave Plus
(908.4 MHz/ 916 MHz)

Wireless Range: 130ft open air

Normal Operating Temp:
77°F
(25°C)
Repeater:
Yes
SPECIFICATIONS
FEATURES & OVERVIEW
Make your home smarter with the IQ Light Bulb. Customize
rules and schedules to maximize user experience.
•
Turn on the light when a door opens
•
Turn off lights when you arm the IQ Panel in “Stay” or “Away”
mode
•
Create a custom lighting schedule while you’re away
•
Turn on light when the IQ Motion is activated
•
Turn on a porch light when someone rings the IQ Doorbell
Product features:
•
Fully dimmable, instant-on LED bulb
•
60 Watts equivalent
•
Low energy consumption (9w)
•
Local control via the IQ Panel
•
Strengthens Z-Wave network and acts as a repeater to other
Z-Wave devices
This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required)
STEP
1
TURN
OFF
POWER
STEP
2
SCREW
IQ LIGHTBULB
INTO SOCKET
STEP
4
TURN
ON
LIGHT
✓
Turn on lamp or light switch
to pair with the IQ Panel.
(
Lightbulb will blink)
Complete pairing process
by touching
Add
Test device
to ensure
proper function
Document#: IQLB-QG-10-16

Revision#: 10/18/16
Qolsys Product #:
QZ2111-840
Qolsys Inc. proprietary.
Reproduction without permission is not permitted.
STEP
3
PUT IQ PANEL
IN “PAIRING”
MODE
Turn off
light switch
or lamp before
replacing bulb
Choose from a pre-set name or use the
keyboard to type a custom name
STEP
5
CUSTOMIZE
NAME AS
DESIRED
STEP
6
ADD TO
NETWORK
Place your panel in
“autolearn" mode
TechSupport@Qolsys.com
CONTACT TECH SUPPOR
T
GOT QUESTIONS?
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer d'interférences et (2) cet appareil doit accepter toute
interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.
FCC ID: 2A
C4EDTA1975027
IC: 1
2S20A-DTA1975027