Qolsys IQ Panel 2 DIY Quick Guide V. 5.2

IQ PANEL 2 QUICK GUIDE
Remove the back plate
WALL MOUNT
Press the buttons on the
bottom to release the back
plate from the panel face
Plug in the power supply
(1) and then clip the wire
to the retainer clip (2)
Secure the back plate to the wall,
then loop the hang strap over the
strain relief hook (1) Run the
antenna through the hole (2)
Place the panel onto the top of the
back plate (1) and hinge downward
until it snaps in place. Take care as
you route the antenna into the wall (2)
Plug in the power supply (1)
and then clip the wire to the
retainer clip (2) then into the
strain relief hook (3)
Replace the back cover
Connect the table stand to
the holes on the upper back.
CREATE
ACCOUNT
Settings
Advanced
(default installer
password is 1111)
Swipe down to access settings tray
Connect power supply
WARNING! Use 5.5v Power Supply ONLY
Press and hold the power
button on the right side of
the panel for 3 seconds to
power up
TRY THE
MOBILE
TECH APP
System
Tests
Cell Test
RUN A
CELL TEST
ACCESS ADVANCED SETTINGS
Wi-Fi
CHOOSE
YOUR
NETWORK
CONNECT
WI-FI
Upgrade
Software
UPGRADE
USING
NETWORK
Check for
updates
CHECK FOR
UPDATES
INSTALL
DEVICES
Installation
Devices
Security
Sensors
Auto Learn
Sensor
Tamper or
trip sensor
Customize
as desired*
Add New
Touch
“Add New”
ADD SECURITY SENSORS
ADD Z-WAVE DEVICES
Z-Wave
Devices
Add
Device
Touch
“PAIR” (both
on panel and
on the device)
PAIR
Add New
Touch
“Add New”
Customize
as desired
*If pairing devices with encryption, be sure to
select “S-Line” as the “Source” of the signals
Security Signaling Residential Fire Alarm & Security
Equipment, UL Listed
Conforms to ANSI/UL Standards
Conforms to ANSI/UL Std. S985. 1023. & 1635
Certified to ULC Sub. C1023 & ULC Std. S545
Doc#: IQP2-QG-12-16 Rev Date: 12/08/16
Qolsys Inc. proprietary. Reproduction without permission is not permitted.
techsupport@qolsys.com
(855) 476-5797
1
2
3
4
5
6
7
8
11
OPTIONAL MOUNTING: TABLE STAND (INCLUDED IN BOX)
9
10 QOLSYS, INC. END USER LICENSE AGREEMENT
PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE INSTALLING OR USING THE SOFTWARE EMBEDDED IN OR USED WITH
THE HARDWARE PRODUCTS PROVIDED BY QOLSYS (“QOLSYS PRODUCTS”) AND ALL OTHER SOFTWARE AND DOCUMENTATION PROVIDED BY
QOLSYS WITH OR FOR USE WITH THE ACCOMPANYING QOLSYS PRODUCTS (COLLECTIVELY, THE “SOFTWARE”).
THE TERMS AND CONDITIONS OF THIS END USER LICENSE AGREEMENT (“AGREEMENT”) GOVERN USE OF THE SOFTWARE PROVIDED BY QOLSYS,
INC. (“QOLSYS”).
Qolsys is willing to license the Software to you only upon the condition that you accept all the terms contained in this Agreement. If you install or use the
Software, then you have indicated that you understand this Agreement and accept all of its terms. If you are accepting the terms of this Agreement on behalf of
a company or other legal entity, you represent and warrant that you have the authority to bind that company or other legal entity to the terms of this Agreement,
and, in such event, “you” and “your” will refer to that company or other legal entity. If you do not accept all the terms of this Agreement, then Qolsys is unwilling
to license the Software to you, and you are not authorized to use the Software.
1. Grant of License.
Conditioned upon your compliance with the terms and conditions of this Agreement, Qolsys grants you a non-exclusive, non-transferable
and non-sublicensable license to use the Software, solely as embedded in or pre-installed on the Qolsys Products and solely for your non-commercial personal
use. Qolsys reserves all rights in the Software not expressly granted to you in this Agreement.
2. Restrictions.
Except as expressly specified in this Agreement, you may not: (a)
 
copy, modify (including but not limited to adding new features or otherwise
making adaptations that alter the functioning of the Software), or create derivative works of the Software; (b)
 
transfer, sublicense, lease, lend, rent or otherwise
distribute the Software to any third party; or (c) otherwise use the Software in a way not permitted by the terms of this Agreement. You acknowledge and agree
that portions of the Software, including but not limited to the source code and the specific design and structure of individual modules or programs, constitute or
contain trade secrets of Qolsys and its licensors. Accordingly, you agree not to disassemble, decompile or reverse engineer the Software, in whole or in part, or
permit or authorize a third party to do so, except to the extent such activities are expressly permitted by law notwithstanding this prohibition.
3
.
Ownership
. The copy of the Software is licensed, not sold. You own the Qolsys Product in which the Software is embedded, but Qolsys and its licensors
retain ownership of the copy of the Software itself, including all intellectual property rights therein. The Software is protected by United States copyright law and
international treaties. You will not delete or in any manner alter the copyright, trademark, and other proprietary rights notices or markings appearing on the
Software as delivered to you.
4. Maintenance, Support and Updates.
Qolsys is under no obligation to maintain, support or update the Software in any way, or to provide updates or error
corrections. However, if any bug fixes, maintenance releases or updates are provided to you by Qolsys, its dealers or a third party, such fixes, releases and
updates are and shall be considered “Software”, and will be subject to the terms of this Agreement, unless you receive a separate license from Qolsys for that
release or update that supersedes this Agreement.
5. Term.
The license granted under this Agreement remains in effect for a period of 75 years, unless earlier terminated in accordance with this Agreement. You
may terminate the license at any time by destroying all copies of the Software in your possession or control. The license granted under this Agreement will
automatically terminate, with or without notice from Qolsys, if you breach any term of this Agreement. Upon termination, you must at Qolsys’ option, either
promptly destroy or return to Qolsys all copies of the Software in your possession or control.
6. Limited Warranty.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND. QOLSYS DISCLAIMS ALL WARRANTIES AND
CONDITIONS, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT, AND ANY WARRANTIES AND CONDITIONS ARISING OUT OF COURSE OF DEALING OR USAGE
OF TRADE. NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED FROM QOLSYS OR ELSEWHERE WILL CREATE ANY WARRANTY OR
CONDITION NOT EXPRESSLY STATED IN THIS AGREEMENT. QOLSYS DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR EXPECTATIONS OR
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE ERROR-FREE OR UNINTERRUPTED, OR THAT ALL SOFTWARE ERRORS WILL BE
CORRECTED.
7. Limitation of Liability.
QOLSYS’ TOTAL LIABILITY TO YOU FROM ALL CAUSES OF ACTION AND UNDER ALL THEORIES OF LIABILITY WILL BE LIMITED TO
$100. IN NO EVENT WILL QOLSYS BE LIABLE TO YOU FOR ANY SPECIAL, INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES
(INCLUDING LOSS OF PROPERTY) OR FOR THE COST OF PROCURING SUBSTITUTE PRODUCTS ARISING OUT OF OR IN CONNECTION WITH THIS
AGREEMENT OR THE EXECUTION OR PERFORMANCE OF THE SOFTWARE, WHETHER SUCH LIABILITY ARISES FROM ANY CLAIM BASED UPON
CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, AND WHETHER OR NOT QOLSYS HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH LOSS OR DAMAGE. THE FOREGOING LIMITATIONS WILL SURVIVE AND APPLY EVEN IF ANY LIMITED REMEDY SPECIFIED IN
THIS AGREEMENT IS FOUND TO HAVE FAILED OF ITS ESSENTIAL PURPOSE. Some jurisdictions do not allow the limitation or exclusion of liability for
incidental or consequential damages, so the above limitation or exclusion may not apply to you.
8. U.S. Government End Users.
The Software and Documentation are “commercial items” as that term is defined in FAR 2.101, consisting of “commercial
computer software” and “commercial computer software documentation,” respectively, as such terms are used in FAR
 
12.212 and DFARS
 
227.7202. If the
Software and Documentation are being acquired by or on behalf of the U.S. Government, then, as provided in FAR 12.212 and DFARS 227.7202-1 through
227.7202-4, as applicable, the U.S. Government’s rights in the Software and Documentation will be only those specified in this Agreement.
9. Export Law.
You agree to comply fully with all U.S. export laws and regulations to ensure that neither the Software nor any technical data related thereto nor
any direct product thereof are exported or re-exported directly or indirectly in violation of, or used for any purposes prohibited by, such laws and regulations.
10. General.
This Agreement will be governed by and construed in accordance with the laws of the State of California, without regard to or application of conflict
of laws rules or principles. The United Nations Convention on Contracts for the International Sale of Goods will not apply. You may not assign or transfer this
Agreement or any rights granted hereunder, by operation of law or otherwise, without Qolsys’ prior written consent, and any attempt by you to do so, without
such consent, will be void. Qolsys has the right to assign this Agreement unconditionally. Except as expressly set forth in this Agreement, the exercise by either
party of any of its remedies under this Agreement will be without prejudice to its other remedies under this Agreement or otherwise. The failure by either party
to enforce any provision of this Agreement will not constitute a waiver of future enforcement of that or any other provision. If any provision of this Agreement is
held to be unenforceable or invalid, that provision will be enforced to the maximum extent possible, and the other provisions will remain in full force and effect.
This Agreement is the complete and exclusive understanding and agreement between the parties regarding its subject matter, and supersedes all proposals,
understandings or communications between the parties, oral or written, regarding its subject matter, unless you and Qolsys have executed a separate agreement
governing use of the Software. Any terms or conditions contained in your purchase order or other ordering document that are inconsistent with or in addition to
the terms and conditions of this Agreement are hereby rejected by Qolsys and will be deemed null.