IS3000 and DT8000 Series Data Sheet

Designed with the installer in mind, these high performance
small form factor motion detectors offer a trouble-free, out of
the box experience to simplify the install process and reduce
install time. With the passive infrared IS3035 and IS3050 and
DUAL TEC DT8035 and DT8050, optimum performance is
achieved using custom developed extended range Fresnel
optics, look down, cover and wall tamper, and selectable pet
immunity. Leading edge sensing technologies and a wide
range of models to suit the requirements of most applications,
Honeywell’s family of IS3000 and DT8000 motion detectors
will maximize intruder detection while diminishing false alarms.
• Sleek, Sturdy Housing

The sleek, sturdy housing blends with
any residential or commercial interior
and is constructed of ABS plastic for
superior shock and impact protection.
It contains a convenient wiring channel,
knockouts for mounting and wiring,
and easy access to terminals. Mounting
screws are located in the rear cover—
enabling easier installation.
• Sealed Optics and Electronics

The optics and electronics are
assembled into the front enclosure and
sealed with a protective cover to prevent
damage during installation. The sealed
optical chamber also prevents drafts
and insects from affecting the detector.
• Integrated Screw Retention Features

To mount the detector on the wall,
the installer will insert the screw in the
integrated mounting feature where it will
be automatically held in place, making
mounting the detector easy and quick.
• Uniform Sensitivity Optics

The custom designed Fresnel lens
provides the same sensitivity for human
targets at the edge of the pattern as
exists directly in front of the detector,
giving these detectors consistent
coverage throughout the protected area.
Shorter precision focal lengths mean
superior optics and detection.
• Wall-to-Wall Coverage

Wide and long detection coverage with
look-down zone for coverage range
protection that exceeds similar products
in the market.
• Advanced DualCore Signal
Processing (DUAL TEC)

DualCore signal processing
analyzes PIR and microwave
signals through the microcontroller.
It supports a multitude of advanced
functions, including concurrent
diagnostics, digital fluorescent
light interference filter, digital
adaptive microwave threshold,
adaptive baselines and bidirectional
temperature compensation.
• Superior Detection and

False Alarm Immunity

The IS3000 and DT8000 detectors
provide superior protection against
false alarms without sacrificing
catch performance.
• Pet-friendly Selectivity

Installers can turn pet immunity on or
off with the flip of a DIP switch. When
pet immunity is enabled, the detector
can distinguish between signals
caused by humans and signals caused
by pets up to 100lbs.
• Selectable Look Down

Provides better coverage up close with

multiple zones in the look-down area.
Look down is switch selectable.
• PIR White Light Immunity

A patented black bug guard reduces
false alarms by providing 6,500 lux of
white light immunity. This helps reduce
false alarm problems caused by lights,
flashlights or reflective objects.
• Flashlight Walk Test

Reduces installation time as the
walk test can be enabled by simply
waving a flashlight at the detector.
Automatically times out.
• Flexible Mountings

The IS3000 and DT8000 motion
detectors mount on walls or in corners,
with heights from 6'9" - 8'9"

(2.1 m - 2.7 m). The IS3000 and
DT8000 family works with the SMB10
family of swivel brackets.
FEATURES
IS3000 and DT8000 Series
IS3035, IS3050, DT8035 AND DT8050
WIRED PIR AND DUAL TEC
®
MOTION DETECTORS IS3000 and DT8000 Series
IS3035 AND DT8035

WIRED PIR AND DUAL TEC
®
MOTION DETECTORS
Specifications
IS3035 (PIR)
DT8035 (DUAL TEC)
Range
40' x 56'/12 m x 17 m
40' x 56'/12 m x 17 m
Power
9.0 - 15 VDC; 11 mA typical, 13 mA maximum;
AC Ripple: 3 V peak-to-peak at nominal 12 VDC
9.0 - 15 VDC; 15 mA typical, 17 mA maximum;
AC Ripple: 3 V peak-to-peak at nominal 12 VDC
Alarm Relay
Energized Form A; 30 mA, 25 VDC,

22 Ohms resistance maximum.

Alarm Relay Duration: 3 seconds
Energized Form A; 30 mA, 25 VDC,

22 Ohms resistance maximum.

Alarm Relay Duration: 3 seconds
Tampers
Cover & Wall; (NC with cover installed) Form A;
30 mA, 25 VDC
Cover & Wall; (NC with cover installed) Form A;
30 mA, 25 VDC
Microwave Frequency
-
10.525 GHz
RFI Immunity
20V/m 10-1000 MHz, 15V/m 1000-2700 MHz
20V/m 10-1000 MHz, 15V/m 1000-2700 MHz
PIR White Light Immunity
6,500 Lux typical
6,500 Lux typical
Fluorescent Light Filter
-
50 Hz/60 Hz
Operating Temperature
14°F to 131°F/-10°C to 55°C
14°F to 131°F/-10°C to 55°C
Relative Humidity
5 to 93%; non-condensing
5 to 93%; non-condensing
Temperature Compensation
Advanced Dual Slope
Advanced Dual Slope
Dimensions
3.86" H x 2.24" W x 1.71" D/
9.8 cm H x 5.7 cm W x 4.35 cm D
3.86" H x 2.24" W x 1.71" D/
9.8 cm H x 5.7 cm W x 4.35 cm D
Weight
3 oz/85 g (net weight)
3.6 oz/102 g (net weight)
Pet Immunity
≤ 80 lbs./36kg
≤ 100 lbs./45kg
PLAN VIEW
ALL
ZONES
AB
CD
7.5ft
(2.3m)
0ft
(0m)
7ft
(2m)
13ft
(4m)
20ft
(6m)
27ft
(8m)
33ft
(10m)
40ft
(12m)
Top View
Side View
13ft
(4m)
0ft
(0m)
7ft
(2m)
13ft
(4m)
20ft
(6m)
27ft
(8m)
33ft
(10m)
40ft
(12m)
7ft
(2m)
0ft
(0m)
7ft
(2m)
13ft
(4m)
20ft
(6m)
20ft
(6m)
27ft
(8m)
33ft
(10m)
27ft
(8m)
33ft
(10m)
IS3035/DT8035
DETECTION
PA
TTERNS
PLAN VIEW
ALL
ZONES
AB
CD
7.5ft
(2.3m)
0ft
(0m)
7ft
(2m)
13ft
(4m)
20ft
(6m)
27ft
(8m)
33ft
(10m)
40ft
(12m
)
Top View
Side View
13ft
(4m)
0ft
(0m)
7ft
(2m)
13ft
(4m)
20ft
(6m)
27ft
(8m)
33ft
(10m)
40ft
(12m)
7ft
(2m)
0ft
(0m)
7ft
(2m)
13ft
(4m)
20ft
(6m)
20ft
(6m)
27ft
(8m)
33ft
(10m)
27ft
(8m)
33ft
(10m)
IS3035/DT8035
DETECTION PA
TTERNS
Z
ones
A
2
Look-down
B
18
Lower
C
46
Intermediate
D
36
Long IS3000 and DT8000 Series
IS3050 AND DT8050

WIRED PIR AND DUAL TEC
®
MOTION DETECTORS
Specifications
IS3050 (PIR)
DT8050 (DUAL TEC)
Range
53' x 72'/16 m x 22 m
53' x 72'/16 m x 22 m
Power
9.0 - 15 VDC; 11 mA typical, 13 mA maximum;
AC Ripple: 3 V peak-to-peak at nominal 12 VDC
9.0 - 15 VDC; 15 mA typical, 17 mA maximum;
AC Ripple: 3 V peak-to-peak at nominal 12 VDC
Alarm Relay
Energized Form A; 30 mA, 25 VDC,

22 Ohms resistance maximum.

Alarm Relay Duration: 3 seconds
Energized Form A; 30 mA, 25 VDC,

22 Ohms resistance maximum.

Alarm Relay Duration: 3 seconds
Tampers
Cover & Wall; (NC with cover installed) Form A;
30 mA, 25 VDC
Cover & Wall; (NC with cover installed) Form A;
30 mA, 25 VDC
Microwave Frequency
-
10.525 GHz
RFI Immunity
20V/m 10-1000 MHz, 15V/m 1000-2700 MHz
20V/m 10-1000 MHz, 15V/m 1000-2700 MHz
PIR White Light Immunity
6,500 Lux typical
6,500 Lux typical
Fluorescent Light Filter
-
50 Hz/60 Hz
Operating Temperature
14°F to 131°F/-10°C to 55°C
14°F to 131°F/-10°C to 55°C
Relative Humidity
5 to 93%; non-condensing
5 to 93%; non-condensing
Temperature Compensation
Advanced Dual Slope
Advanced Dual Slope
Dimensions
3.86" H x 2.24" W x 1.71" D/
9.8 cm H x 5.7 cm W x 4.35 cm D
3.86" H x 2.24" W x 1.71" D/
9.8 cm H x 5.7 cm W x 4.35 cm D
Weight
3 oz/85 g (net weight)
3.6 oz/102 g (net weight)
7ft
2 m
0
0
13ft
4 m
20ft
6 m
27ft
8 m
33ft
10 m
40ft
12 m
7ft
2 m
13ft
4 m
20ft
6 m
27ft
8 m
33ft
10 m
40ft
12 m
7ft
2 m
13ft
4 m
20ft
6 m
27ft
8 m
33ft
10 m
40ft
12 m
46ft
14 m
53ft
16 m
7.5ft
(2.3m)
0ft
(0m)
7ft
(2m)
13ft
(4m)
20ft
(6m)
27ft
(8m)
33ft
(10m)
53ft
(16m)
47ft
(14m)
40ft
(12m)
Top View
Side View
PLAN VIEW
ALL
ZONES
IS3050/DT8050
DETECTION
PA
TTERNS
A
B
CD
7ft
2 m
0
0
13ft
4 m
20ft
6 m
27ft
8 m
33ft
10 m
40ft
12 m
7ft
2 m
13ft
4 m
20ft
6 m
27ft
8 m
33ft
10 m
40ft
12 m
7ft
2 m
13ft
4 m
20ft
6 m
27ft
8 m
33ft
10 m
40ft
12 m
46ft
14 m
53ft
16 m
7.5ft
(2.3m)
0ft
(0m)
7ft
(2m)
13ft
(4m)
20ft
(6m)
27ft
(8m)
33ft
(10m)
53ft
(16m
)
47ft
(14m)
40ft
(12m)
Top View
Side View
PLAN VIEW
ALL
ZONES
IS3050/DT8050
DETECTION PATTERNS
A
B
CD
Z
ones
A
2
Look-down
B
18
Lower
C
20
Intermediate
D
54
Long ORDERING
IS3035

PIR Motion Detector, 35 foot

IS3050

PIR Motion Detector, 50 foot

DT8035

DUAL TEC Motion Detector, 35 foot

DT8050

DUAL TEC Motion Detector, 50 foot
Accessories*
SMB10

Swivel Mount Bracket (0-000-110-01)

SMB10C

Swivel Mount Ceiling Bracket (0-000-111-01)

SMB10T

Swivel Mount Bracket with Tamper (0-000-155-01)

2103
Riser Rated Cable, Solid 22 AWG, 4 Conductor

3103


Plenum Rated Cable, Solid 22 AWG, 4 Conductor
APPROVAL LISTINGS
• UL 639

• ULC S306-03

• SIA PIR-01-2000

• FCC part 15, Class B verified

• IC ICES-003, Class B verified
IS3000 and DT8000 Series
IS3035, IS3050, DT8035 AND DT8050
L/IS3DT8SND/D
July 2016
© 2016 Honeywell International Inc.
For more information:
www.honeywell.com/security
Automation and Control Solutions
Honeywell Security and Fire

2 Corporate Center Dr. Suite 100
P.O. Box 9040
Melville, NY 11747
1.800.323.4576
www.honeywell.com
Note:
Honeywell reserves the right to alter the specification of products without prior notice.
*Accessories not evaluated by UL.