Lutron Caseta - Apple HomeKit Troubleshooting Guide

Unable to add new home
2
How to sign out of iCloud
2
How to sign in to iCloud
4
How to reset HomeKit data
5-6
How to invite a second user (Apple ID)
7-8
Siri on mulitple devices using the same Apple ID
9
Devices not responding to Siri commands
9
Contents HomeKit Troubleshooting Guide for Caseta Wireless
“Unable to add new home”
1. Sign out of iCloud*
a. Navigate to the iOS Settings menu
b. Select iCloud
c. Press Sign Out.

NOTE:
For security reasons Apple Pay wil be disabled and all your stored cards will
be removed
d. Press “Delete from My iPhone” when asked about moving iCloud notes

NOTE:
Your iCloud notes aren’t being deleted permanently, you just won’t have access to
them when you are signed out, since they are stored in the cloud. Data like this will be
accessible again as soon as you sign back in to your iCloud drive.
e. You can keep iCloud Safari data, reminders, and contacts on your iPhone by selecting
“Keep on My iPhone”
f. Enter your Apple ID password
g.
NOTE:
Find My iPhone will automatically be turned off
*if you have multiple Apple devices you may need to sign out of iCloud on all your devices
HomeKit Troubleshooting Guide for Caseta Wireless
2. Add a new home
a. Navigate to the settings menu in the Lutron app
b. Select Siri Integration
c. +Add home
d. Name your home
e. Point the phone’s camera at the bottom on the Smart Bridge
f. The setup code will be automatically read and you will receive confirmation that
your bridge has been added
g. If you are still unable to add a home, move to Step 5

3. Test basic Siri commands
a. “Turn on my lights”
b. “Turn of my main overhead lights”
c. These commands should work without needing to set-up HomeKit rooms and
zones
d. If the above commands do not work, move to Step 5
HomeKit Troubleshooting Guide for Caseta Wireless
4. Sign in to iCloud and turn on Keychain
a. Enter you Apple ID and Password
b. Select if you wish to merge the reminders and contacts from your phone to iCloud
c. Find My iPhone will be enabled automatically
d. Turn on Keychain from the iCloud menu
e. Select “Restore with Security Code”
WARNING:
Selecting “Reset iCloud
Keychain” will reset HomeKit data and you will have to re-start the entire setup
process HomeKit Troubleshooting Guide for Caseta Wireless
4. Sign in to iCloud and turn on Keychain (continued from page 4)
f. Enter your iCloud security code
g. You will receive a text message with a Verification Code
h. Enter the Verification Code to complete the process
5. If you are still unable to add your home, it may be necessary to reset HomeKit data on your
Smart Bridge and your iOS device(s)
a. First, press and hold the black button on the back of your Smart Bridge
for 20 seconds

b. Repeat steps 1-4
c. If you are still unable to add a new home, reset the HomeKit data and your iOS
devices

WARNING:
This will remove all pairings with other HomeKit accessories and should
as a last resort. If you own no HomeKit accessories besides the Smart Bridge, this
step can be performed without risk of losing valuable data. HomeKit Troubleshooting Guide for Caseta Wireless
5. If you are still unable to add your home, it may be necessary to reset HomeKit data on your
Smart Bridge and your iOS device(s) (continued from page 5)
d. Navigate to the iOS Settings menu
e. Select Privacy
f. Select HomeKit
g. Reset HomeKit Configuration
h. Repeat steps 1-4 HomeKit Troubleshooting Guide for Caseta Wireless
How to invite a second Apple ID
1. Invite the second user
a. Navigate to the Settings menu in the Caseta App
b. Press Siri Integration
c. Press Edit Home & Users
d. Press Use Management
e. Press Invite people
f. Either type the Apple ID of the person you wish to invite, or select them from your contacts
by pressing the + sign
g. Press Add
h. It should now say “Invited” next to the user’s Apple ID
i. If you wish to cancel the invitation, select the invited user’s Apple ID and then press
Cancel Invitation

Before you begin:
Both devices must be connected to the same Wifi network as the Smart Bridge
and each iOS device must be signed into iCloud with Keychain enabled HomeKit Troubleshooting Guide for Caseta Wireless
2. Accept the invitation on the secondary iOS device
a. Navigate to the main iOS Settings menu
b. Press HomeKit
c. Press Accept
d. The HomeKit home should now show under SHARED
e. The invited user should now show on the original device without the word “Invited”
f. If the invitation is not received by the second Apple ID, sign out of iCloud by following the
instructions found on page 2 of this guide
g. Sign back in to iCloud and enable keychain on the invited device. Instructions can be found
starting on page 4.
h. If the invite still does not show, sign out/in of iCloud on the device that is sending the
invitation. Be sure to enable keychain again after signing in to iCloud.
i. If the invitation still doesn’t show, Cancel/Resend the invitation
j. Once the invitation has been accepted Siri commands should work from the second device
Devices not responding to Siri commands
1. If the unresponsive device(s) were just added to the Smart Bridge, they may not have
registered correctly with Apple’s HomeKit database
a. If the registration did not happen automatically, powercycle the bridge to force HomeKit registration
of the new devices
2. If the unresponsive devices were added previously, verify that they are within range of the
Smart Bridge, powered on, and have a load attached
3. It may be necessary to delete the device from the app, factory reset the dimmer, and then
re-add it through the Caseta app
HomeKit Troubleshooting Guide for Caseta Wireless
Using Siri on mulitple devices (Same Apple ID)
a. First, verify that HomeKit has been setup successfully on the “main” device
b. Any Siri command that works on the main device should work on any iOS device signed in
to the same iCloud drive
c. If a certain device is not working, make sure it is a device capable of running (and currently
running) iOS 8.1 or later
d. Then, sign out of iCloud by following the instructions found on page 2 of this guide
e. Sign back in to iCloud and enable keychain on the device. Instructions can be found
starting on page 4.
f. If Siri commands still do not work on a secondary device, it may be necessary to
sign out/in of iCloud on the main device.
NOTE:
Be sure to enable Keychain after signing in
Before you begin:
All devices must be connected to the same Wifi network as the Smart Bridge
and each iOS device must be signed into iCloud with Keychain enabled