PROOUTMV Product Data Sheet - Dated 12/23

Features & Benefits
•
Motion-Activated Video:
Captures video
for transmission to Total Connect and

the ProSeries panel for end-user
verification purposes.
•
Fast, Easy Installation:
Completely
wireless, with easy to replace batteries
•
Large Coverage Area:
40' x 56'
(12m x 17m) detection pattern
•
Fast Video Transfer:
Helps expedite

alarm verification and response.
•
Night Vision:
Captures images in little

or no light.
•
Remote Sensitivity Adjustment:

Saves time and reduces service calls.
•
Strong Data Security:
Two-Way AES
encryption
•
Supervision:
Transmits a periodic

check-in/status signal to the ProSeries panel.
•
Pet Immunity:
Will not trigger alarm
for pets up to 80 lbs when installed at
recommended height and set to low
sensitivity.
The ProSeries Indoor and Outdoor MotionViewers are battery-powered devices that
include an integrated PIR motion sensor, digital video camera, and white illuminator.
When installed in a ProSeries (PROA7PLUS) security system, it can detect a
potential intruder, record a short video clip, and transmit it to Total Connect where
the end user can verify if it was a false alarm or not. The confirmation that an
intrusion or other event is in progress can reduce false alarms and help achieve a
faster, higher priority response from first responders.
When the ProSeries system is armed and the motion detector senses motion, the
camera captures an image or up to a 10-second digital video clip. The alarm is
reported via the control panel to the central monitoring station, while the video or
image is delivered to Total Connect along with a notification, in accordance with the
system’s configuration and programming. The video or image may also be viewed at
the ProSeries control panel or secondary touchscreen keypad.
With ProSeries, these devices can also be programmed to deliver notifications to
the end-user, using the new Awareness or 24-hr. Awareness Zone Response. The
device may be programmed to be active only when a partition is armed (Awareness)
or always on (24-hr. Awareness), and may be configured with various sound options
when triggered. The sound options include None, Chime Only, Continuous Trouble
beeping, and Alarm On siren. When motion is detected, the device captures an
image or up to a 10-sec video clip which is sent to the panel and subsequently to
Total Connect. Both the panel (and secondary touchscreens) and Total Connect
receive a notification that an event was detected. An optional curtain sleeve is
available for the PROOUTMV allowing the installer to customize the activity area that
the PIR monitors.
PROINDMV/PROOUTMV Wireless MotionViewers
ProSeries MotionViewer
®
PROINDMV
PROOUTMV
PROOUTMV-CT
Curtain Sleeve
(included in box)
PROOUTMV-MB
Mounting Bracket
(not included in box)
Detection Patterns:
To p V iew
Side View For more information
resideo.com
L/PSINDMOVD/D | HDS | 12/23
© 2023 Resideo Technologies, Inc.
All rights reserved. This product

is manufactured by Resideo
Technologies, Inc. and its affiliates.
Resideo Technologies, Inc.
2 Corporate Center Drive, Suite 100
P.O. Box 9040
Melville, NY 11747
1-800-645-7492
PRODUCT
DESCRIPTION
PROINDMV
ProSeries Indoor MotionViewer
PROOUTMV
ProSeries Outdoor MotionViewer
PROOUTMV-CT
Curtain Lens Sleeve for PROOUTMV (3 pack)
PROOUTMV-MB
Mounting Bracket for PROOUTMV
Ordering Information
ProSeries Indoor MotionViewer
®
Technical Specifications
ELECTRICAL
Battery:
PROINDMV - 3 CR123A Lithium;
PROOUTMV - 3 Duracell DL123A
or Panasonic CR-123A
Nominal Voltage:
3V
Low Battery Threshold:
2.7V
Estimated Battery Life:
Up to 4
years based on typical usage
Current Consumption:
Standby

(1h average) 85 μA/Max. 350 mA
RADIO PROPERTIES
Wiselink
®
Technology
Radio Type:
Spread Spectrum
RF bidirectional
Operating Frequency:
915
MHz (USA and Canada)
Transmission Security:
AES
algorithm encryption
Supervision:
Radio, batteries
Radio Antenna:
Integrated
INSTALLATION AND MOUNTING
Mounting Height:
7 ft 6 in (2.3 m)
Installation:
Both mount on flat
wall or corner; PROOUTMV may
use included bracket to mount
ENVIRONMENTAL
Operating Temperature:
PROINDMV:

14° to 131° F (-10° to 55° C)
PROOUTMV:

-20° to 140° F (-30° to 60° C)
Max. Relative Humidity:
93%, without condensing
Physical Protection:
PROINDMV: IP30 and IK04
PROOUTMV: IP65 (Weatherproof)
PHYSICAL PROPERTIES
PROOUTMV:

H 5.04 in (128 mm) x W 2.28 in
(58 mm) x D 2.17 in (55 mm)
PROOUTMV w/sleeve:

H 5.20 in (132 mm) x W 2.44 in
(62 mm) x D 2.76 in (70 mm)
PROOUTMV w/Sleeve & Bracket:

H 5.20 in (132 mm) x W 2.44 in
(62 mm) x D 5.08 in (129 mm)
VIDEO PROPERTIES
Camera
Field-of-View:
90°
Sensor Type:
CMOS
Spectral Resolution:
Color
Night Illumination:
Automatic
with one white LED
Video Distance:
23 ft (7 m)
Encoding:
H.264
Frame Rate:
10fps
Resolution:
QVGA (320 x 240)
(VGA capable 640 x 480)
Video File Size:
Up to 230kB
SNAPSHOT
Encoding:
JPEG
Spatial Resolution:
QVGA (320 x 240) / VGA (340 x 480)
File Size:
Up to 230kB
PASSIVE INFRARED DETECTION
Ty p e:
Dual Element Sensor
Lens:
Fresnel
Detection Angle:
90°
Detection Distance:

40 x 56 ft (12 x 17 m)
Initialization Time:
90 seconds
Recovery Time:
90 – 180 seconds
APPROVALS
915MHz FHSS
CERTIFICATIONS
USA FCC Part 15C

(FCC47 CFR Part 15)
CANADA IC (RSS 247, Issue 1)
UNIQUE TO PROOUTMV
Conforms to UL STD 639
Certified to ULC STD S306
COMPATIBLE CONTROLS
PROA7PLUS, PROA7PLUSC,
and PROA7PLUSCN