Qolsys IQ Pendant Quick Installation Guide

Convenience on a keychain
IQ FOB
QUICK INSTALL GUIDE
SPECIFICATIONS
The IQ Pendant is a safe and reliable way to ensure you have help at the press of a button.

Emergencies are usually a surprise, and being near your panel or phone to call for help is not a
guarantee.
The IQ Pendant comes with a “Heartbeat” LED that blinks every minute to assure user. This fully
sealed water resistant pendant has a typical battery life of 4-6 years.
Housing Dimensions: 1.5”H x 1.2”W x .6
”D
Compatibility Replaces: 60-578-95 (soap on a rope) Panic
and 60-906-95 Micro Panic.

Button Function: Press=Fault, Release=Restore


Supervisory Signals: sent every hour.

Transmitter frequency: 319.5 MHz
Water Resistant: Not submersible, but tested to 1 meter
depth.

Operating Temperature: 0°F~120°F

Battery: Sealed unit; not replaceable
.
This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required)
LEARN
INTO
PANEL
Document#: IQDW-QG-03-17

Revision#: 3/8/17
Issue Date: MAR 2017

Qolsys Product #: QS-6110
-P01
STEP
2
STEP
1
The heartbeat
LED blinks every
60 seconds.
The unit will send
a low battery
signal to notify
user.
STEP
3
TRIGGERING
YOUR
SYSTEM
TESTING
YOUR
SYSTEM
Press the red
button down in
an emergency.

This pendant can
be worn on the
wrist or around
the neck.
Place your panel in
“autolearn" mode
Customize name and settings
as desired and and touch “ADD”
ADD
Press and hold the button
to “tamper” the device
TechSupport@Qolsys.com
Qolsys Inc. proprietary.
Reproduction without permission is not permitted.
FCC ID: U5X-RE103
IC: 8310A-RE103
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer d'interférences et (2) cet appareil doit accepter toute
interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.
CONTACT TECH SUPPOR
T
GOT QUESTIONS?