Qolsys IQ Remote - Install Guide Dated 2018

QUICK GUIDE-IQ REMOTE
Secondary tablet
for the IQ Panel 2
INFORMATION
The IQ Remote is a 7” secondary tablet that can be installed to create additional
access to the IQ Panel 2. You can pair up to three (3) IQ Remotes with the IQ
Panel 2.
Document#: IQR-QG-03-18
Revision#: 3/30/18
Issue Date: MAR 2018
Qolsys Part #: QW9103-840
Software : 2.1.0
Additional documentation located
on qolsys.com
Power S
upply
IQ Remote
NEED HELP?
(855) 4-QOLSYS
TECHSUPPORT@QOLSYS.COM
Wall Mount Bracket
and Screws
Optional Table Stand
IN THE BOX
OPTION 1: WALL MOUNTING
OPTION 2: TABLE STAND
Secure wall mount to
the wall with
provided hardware
Choose your
location
Connect table stand to upper
holes on the back of the
device and snap into place
Connect your power
supply
Choose your
location
Connect power
supply to the back
Slide IQ Remote onto
wall mount bracket QUICK GUIDE-IQ REMOTE
PAIRING THE IQ REMOTE WITH THE IQ PANEL 2
Perform the following steps on the
IQ Pane
l 2 to pair an IQ Remote
Touch
“Settings”
Enter Installer Code
(default is 1111
)
Touch
“Installation”
Touch
“Pair
”
Touch “PAIR” on the IQ Remote to
pair with IQ Panel 2
The IQ Remote will take a moment to synchronize with the IQ Panel 2 over the network. If a software update
is available it will download automatically. Once complete the home screen will appear. To add additional IQ
Remote tablets repeat steps above with up to three (3) total devices.
Touch “IQ
Remote
Devices”
Touch
“Devices
”
* * * *
Page
of
Qolsys Confidential and Proprietary.
2
2
NEED HELP? (855) 4-QOLSYS TECHSUPPORT@QOLSYS.COM
CONNECTING THE IQ REMOTE TO WIFI
IMPORTANT: Please check that the IQ Remote can successfully connect to the network in the chosen installation location
Select network from
available list.

POWER UP THE DEVICE
Press and hold the power button until the screen illuminates (approx 3-5 sec)
Touch
“Activate WIFI”
Enter WIFI
credentials
Perform the following step on the
IQ
Remote
to pair with the IQ Panel 2
Whitehouse
Your Neighbor
Password
Touch
“Advanced
Settings
”
Touch
“WI-FI Devices
”
Pair
PAIR
The IQ Remote pairs with the IQ Panel 2 over a secure WIFI Network (802.11 B, G, N) and must be connected to
the same 2.4 GHz network as the IQ Panel 2 before you can add it to the system. To connect to a secure WIFI: