Qolsys IQ Temp-S - Quick Install Guide Dated 08/18

STEP
1
IQ TEMP S-LINE QUICK INSTALL GUIDE
CHOOSE
INSTALLATION
LOCATION
SPECIFICATIONS
SEE REVERSE FOR REMAINING STEPS
Features:
Low Temp and High Temp Warning
•
Low Temp alarm: Temperature drops below 40F,
restores when temperatures rises above 45F
•
High Temp alarm: Temperature rises above 100F,
restores when temperature drops below 95F
Sensor:
•
Cover tamper
•
Unique ID for each function
•
Temperature check every 5 minutes
•
Battery checked every hour
Batteries:
(2) -Panasonic CR2032
-Energizer CR2032
-Duracell DL2032
The IQ Temp is designed to alert you if temperatures drop below 40°F or rise above
100°F. This early warning may help you protect your valuables, pets and home from
extreme heat or cold in the event of a HVAC or thermostat failure.
Mounting Locations
Ideally suited for a wide range of applications including:
•
Bathrooms
•
Laundry Rooms
•
Basements
*NOTE: Avoid areas that may retain heat, such as furnace rooms or near hot water pipes
This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required) Document#: IQTEMP-SQG-08-18
Revision#: 8/22/18
Issue Date: AUG 2018
Qolsys Product #: QS5535-840
STEP
2
STEP
3
Select “Freeze” as your sensor
type and customize settings as
desired
Click “Add”
REMOVE
BATTERY
TABS
APPLY
ADHESIVE
INSTALL IN
DESIRED
LOCATION
*
NOTE: Sensor Type “Freeze” (Sensor Group 52) is used for both Low Temp sensors and High Temp sensors. You can
customize the Sensor Name to differentiate which one you are learning
STEP
4
STEP
5
LEARN
INTO
PANEL
Place your panel in
“Add Sensor” mode
STEP
6
A
STEP
6
B
TechSupport@Qolsys.com
Qolsys Inc. proprietary.
Reproduction without permission is not permitted.
FCC ID: 2ABBZ-RF-CHW-S
IC: 11817A-RFCHWS
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference


that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and


(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer d'interférences et


(2) cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.
CONTACT TECH SUPPORT
GOT QUESTIONS?
SECURE
CONNECTS
USING
319.5 MHz
2A21A1
LEARN
AS HIGH
TEMP
(100°F)
Type in “H” DL code for
high temp
H:XXXXXX
Type in “L” DL code for
low temp
LEARN
AS LOW
TEMP
(40°F)
2A21A1
L:XXXXXX