Resideo Skybell DBCAM-TRIM2 - Technical Specifications
Related Products
Related Categories
- Security Doorbells
- Doorbell Cameras
- Wireless Security Cameras
- Wireless Doorbell Cameras
- Security Doorbells
- Doorbell Cameras
Document Transcript
1
7/29/2021
DBCAM
-
TRIM2 Technical Specifications
•
C
amera: Color, 1.3MP
•
Field of View: 180° diagonal
•
Video: 480p/720p/1080p H.264 @10fps
•
Audio: Half Duplex 2
-
way audio
•
Night Vision: Full color, Ultra Low Light Imager (.05 LUX)
•
LEDs: Color (software selectable), 16 million color combinations
•
Motion Sensor: PIR detection 130° @ 10FT, AI
•
Microphone: Omni
-
directional, Sensitivity
-
26 +/
-
3dB
•
Speaker: Built
-
in, 1W, 8ohm x1
•
Power: Wired (see Power Requirements)
•
Battery: Po
wer regulator, 350 mAh, Low temperature Li
-
Polymer, non
-
removable battery
•
Battery Cycle Life: >80% after 300 cycles (Fully discharged)
•
Case Material: PC/ABS plastic UL94
-
V0
•
Finish/Color: Painting bronze, NCVM Silver
•
Operating Temperature:
-
35°C to
50°C /
-
31°F to 122°F
•
Operating Humidity: 10%RH~80%RH (Class III equipment)
•
Weather Proofing: IP34/PCBA waterproof coating, UV coating
•
Regulatory: FCC, IC/ID, CE, TELEC, ETL, ARCOTEL, CB, ENACOM, MOC, NOM, RCM,
RoHS, SII, SUBTEL, WEEE, IFETEL, SUTEL,
ANATEL
Connectivity
•
Chipset: Realtek RTL8822C
S
•
802.11: ac/b/g/n 2T2R
•
Wi
-
Fi Frequency Band: 2.4GHz, 5GHz
•
Bluetooth: BLE 4.2
2
7/29/2021
POWER REQUIREMENTS
Wired Power Set
-
Up: 2
-
wire set
-
up connecting to a mechanical chime, or a digital chime
(requires SkyBell Digital Doorbell adapter) in line with a doorbe
ll transformer. External power
source connected to 110/220 AC power. The external power source must conform with one of
the following; North America
–
NEC Class 2 Transformer with an output from 10 to 30 VAC, 10
VA, OR 12 VDC Limited Power Source (LPS) wit
h an amperage rating of 0.5 amps.
International
–
Low voltage transformer: 8 VAC 1 AMP, or 12 VDC limited power supply with an
amperage rating of 0.5 amps.
- Uploaded