Winland WBTX319 and Winland WBTX345 - Specification Sheet

WBTX-319

WBTX-345
Wireless Water Sensor
For proper operation,
model
WBTX
must be used in conjunction with an alarm system.
It is designed so that the
transmitter
(figure 1)
mounts on a wall or other flat vertical surface
,
and the
sensor
(figure 2)
is
placed in the location where water leakage is most probable.
Unit Specifications
Power Requirement:

Wireless Signal Range:
Code Outputs:


Transmitter frequency:
Batteries - replace battery with exact replacement every 5 years with a 3V Lithium (x2)

600 ft (200M), open air
tamper, tamper restore, alarm, alarm restore, low battery
319.5 MHz or
345 MHz
Supervisory keep-alive interval: 70 minutes
RF Peak field strength:
Operating Temperature:
Relative Humidity:
Storage Temperature:
Max Cable Length:
Package Weight:
Transmitter Dimensions:
Probe Dimensions:
Mounting:
Case Material:
Warranty:
Typical 36000 uV/m at 3m
32° to 122°F (
0° to 50°C
)
5 - 95% Non-condensing
-40° to
140
°
F (-40° to 60°C)
72"
.158 lbs.
2.5” H x 1” W x .5” D
88” H x 1.88” L x .375” D
Mount to wall surfaces (vertical) as well as floor surfaces (horizontal) using screws or
adhesive tape included.
ABS
1 Year Limited
Winland Electro
nics
800.635.4269

www.winland.com
Figure 1
Figure 2
Transmitter Dimensions
Probe Dimensions