Winland WBTX319, WBTX345 - Data Sheet



Related Products

Winland WBTX319 - Interlogix/GE and Qolsys Compatible Wireless Flood Sensor
Winland WBTX319
Interlogix/GE and Qolsys Compatible Wireless Flood Sensor
List Price: $44.00
Our Price: $32.99

Related Categories


Document Transcript

Water Intrusion-
Why not have piece of mind?
Stop worrying about water damage to your inventory
and critical assets!
With the
Wireless WaterBug
, you’ll experience c
onfidenc
e in
knowing that your home and business
are protected.
The
Wireless WaterBug

provides early warning for potential
critical water damage.
Wireless Water Sensor
WBTX-319
WBTX-345
www.winland.com

solutions@winland.com

800-635-4269
Compatible with:
Honeywell®
2GIG®
C
ompatible with:

interlogix®

Qolsys® According to statistics, you are 7 times more likely to have water damage in your home or business,
than to have damage as a r
esult of fir
e.
Cause of loss and average cost incurred are as follows:
PRODUCT OVERVIEW
Purchase through your local low-voltage Security Distributor
The WaterBug Wireless Sensor is used to detect leaks caused by water pipes, refrigeration units, freezers, and
anywhere that you could anticipate having a water leakage issue. Think of it as an investment in your home and
business, that is protecting your assets against costly water damage.
The WBTX is not a self-contained warning device. For proper operation, it must be used in conjunction with a
wireless alarm system. It is designed so that the transmitter mounts on a w
all or other fla
t vertical surface, and the
remote probe is placed in the location where water leakage is most probable. Moisture forming a bridge between
the two metallic contacts on the remote probe is all that is needed for the unit to signal an alarm condition. The
output on the WBTX will remain in alarm state until the moisture bridge is broken. As sensitive as the WBTX is, it
will not alarm due to high humidity or condensation. The WBTX is ideal for use in homes
, offic
es, computer rooms,
warehouses, etc.

Features:

Water Detection when liquid makes contact with probe

Contacts abov
e floor lev
el to preven
t false floor c
ondensation detection

Checks for water constantly, requires two positive checks for a valid alarm
• Code outputs: tamper, tamper restore, alarm, alarm restore,
low battery
• Tamper Switch: Included inside transmitter
• Transmitter frequency: 345 MHz & 319.5 MHz
a.
RF Peak field strength: typical 36000 uV/m at 3m
b.
Unique code ID:
• Wireless signal range: 600ft (200M), open air
www.winland.com

solutions@winland.com

800-635-4269
• Supervisory keep-alive interval: 70 minutes
• Operating Temperature:
32° to 122°F (0° to 50°C)
• Relative Humidity: 5 - 95% Non-Condensing
• Transmitter: 2.71” L x .95” W x .56” D
• Probe Dimensions .7” W x 1.77” L x .38” D Cord length 6’
• Storage Temperature:
-40° to 140°F (-40° to 60°C)
Cause of Loss
Average Cost**
Frozen Pipes
$66,900
Faulty Plumbing
$35,500
Appliance Leak
$28,300
Bathroom Fixture Leak
$35,400
**Figures are based on CHUBB internal three-year average paid claim data from 2013-2015. Whether or to what extent a particular loss is covered,
depends on the facts and circumstances of the loss and the actual coverage of the policy as issued.
Sp
ecific
ations:


Uploaded