Resideo IP-COM

The Resideo IP-COM is an internet-only communicator that supports Total Connect 2.0 (TC2) remote services. It connects to the internet via an ethernet connection. The IP-COM joins the LTEM-P line of communicators that support modular upgrades. Available modules must be purchased separately and they are the PROWIFIZW, PROWIFI, and the PRODCM.

The IP-COM wires to the compatible Honeywell or Resideo alarm panel. It comes with a wiring harness that only requires a connection of three (3) wires. The IP-COM also has the ability to support Total Connect 2.0 (TC2) services with Honeywell/Resideo panels, and also, DSC and Interlogix panels. For the DSC line, the DSC PC1616, PC1832, and PC1864 panels are supported. In the Interlogix/GE line, the NX-8, NX-8V2, NX-6V2, and NX-4V2 panels are supported. With the Interlogix panels, it requires the use of the PRODCM Dialer Capture Module. The IP-COM can serve as a universal communicator for alarm reporting. The IP-COM is compatible with any alarm panel using Contact ID, by using the PRODCM.

The IP-COM is an AlarmNet 360 (AN360) communicator. It only sends signals to AlarmNet via the internet. Use this communicator with a VISTA-15P, 20P or 21iP panel and dealers have the ability to completely program the panel from AN360. This includes programming zones, users, and schedules. All from the convenience of a computer or by using the AN360 Mobile App. AN360 is not available for homeowners, it is a dealer-only tool. It can decrease the time it takes to setup or make changes to your account.

The IP-COM can be modular upgraded. Use the PROWIFI module to use WIFI instead of the standard ethernet connection. Use the PROWIFIZW module to add WIFI and a Z-Wave automation controller. Then have the ability to add Z-Wave lights, locks, thermostats, and more. See the Z-wave compatibility list for supported devices. Theses WIFI modules only support the 2.4 GHz WIFI networks only. The ProSeries WIFI devices do not support 5 GHz WIFI networks. Please also note that it is not possible to use both a wired ethernet connection and a ProSeries WIFI Module simultaneously with the Honeywell IP-COM. Use of only one of these compatible internet options is possible, at any given time.

If you like the IP-COM, but you decide you want to have an LTE cellular integrated as a backup method, then there are options. The LTEM-PXA adds an AT&T LTE cellular and the LTEM-PXV add a Verizon LTE cellular connection. These are in addition to the ethernet or WIFI internet options.

Specifications

• Product Type: AlarmNet Internet-only Communicator
• Compatibility: Honeywell VISTA Panels (ECP Panels Only unless PRODCM is used). Select DSC and Interlogix panels, per the Install Guide. Any panel that supports POTS communication and Contact ID format (PRODCM required).
• Internet Connectivity: Wired Ethernet OR WIFI (Requires PROWIFI or PROWIFIZW, 2.4 GHz Networks Only)
• LED Status Lights: Yes
• Tamper Detection: Yes (cover and wall)
• Mounting Hardware: Included
• Wiring: ECP Harness (Resideo part# 600-00151) included
• Input Power: 12VDC from panel
• Current Draw: 190mA to 275mA depending on installed modules (see install guide)
• Dimensions: 7.3" X 9.0" x 1.7" (18.6cm x 22.8cm x 4.4cm)
• Weight: 16.4 oz (466g)
• Operating Temperature: 32℉ - 120℉ (0℃ - +49℃)
• Storage Temperature: -40℉ - 158℉ (-40℃ - +70℃)
• Relative Humidity: 0% to 95%, Non-Condensing
• UL/ULC Installations Humidity: 0% to 85%/0% to 93%
• Operating Altitude: to 10,000 ft (3,048 m)
• Storage Altitude: to 40,000 ft (12,192 m)
• Certifications: ETL Listed to UL 1021, UL 1610, and UL 365