Resideo LTEM-PXV, LTEM-PXA, and IP-COM Data Sheet - 2022

• Quick connection to Resideo control panels
and non-Resideo compatible control panels
(see panel compatibility)
• Supports both ECP and Bus connections

to compatible control panels
• Powered by the control panel’s 12VDC
auxiliary output
• Supports dynamic or static IP addressing,
and installs behind firewalls without
compromising network security
(Ethernet only, WIFI does not support
STATIC addressing)
Resideo is committed to providing the best alarm communication solutions for

the security industry. Our LTEM-P Communicators utilize the latest LTE
®
technology
specifically designed for loT devices to communicate with AlarmNet
®
. The IP-COM
communicates via the Internet only.
The CAT-M1 LTE technology, used by leading carriers, has greater signal strength and
power efficiency compared to CAT-1, improving performance underground and within
structures.* LTE CAT-M1 technology is available everywhere that current LTE networks
reach with strong enough reception for consistent connections.
The LTEM-P Communicators easily connect to customers’ security system control
panels and sends alarms and messages to AlarmNet for transfer to the central
monitoring station.
The LTEM-P Line includes the following models:


• LTEM-PXV (Verizon
®
network)


• LTEM-PXA (AT&T
®
network)
The LTEM-P Line and IP-COM also support these optional plug-in modules:


• Wi-Fi
®
/Z-Wave
®
Module for Wi-Fi connection to the Internet and/or for

control of home automation devices (model PROWIFIZW)

• Dialer Capture Module for use with control panels that send Contact ID

signals via Dialer (model PRODCM)

• Wi-Fi Module for Wi-Fi connection to Internet
Advanced Modular Communicator

LTEM-PXA, LTEM-PXV, and IP-COM
For VISTA
®
and Competitive Control Panels
Product shown without any optional add-ons.
*Source: AT&T and Verizon
• Supports connection to the Internet via
Ethernet cable or Wi-Fi (Wi-Fi requires
installation of PROWIFIZW or PROWIFI
module) – only one method can be used,
Ethernet or Wi-Fi, not both
• Reports alarms and status messages
via the Internet (LTEM-PX series
communicators provide cell radio backup
reporting)
• Allows uploading and downloading of
VISTA control panel data
• Supports Remote Services feature, which
allows the end user to access their security
system from their computer via a website.
Availability of this service is controlled by
the dealer via the web-based programming
tool on the AlarmNet 360 website
• Multi-function Test switch used to generate
test messages, register the communicator
with AlarmNet, enter Pairing mode (used
during Wi-Fi module installation), reboot
the communicator, and to reset the
communicator to factory default settings
Features & Benefits Resideo Technologies, Inc.
2 Corporate Center Drive, Suite 100
P.O. Box 9040
Melville, NY 11747
Office:
1-800-645-7492
For more information
resideo.com
L_LTEMPXD_D | AF | 09/22
© 2022 Resideo Technologies, Inc.

All rights reserved.
The Honeywell Home trademark is used under
license from Honeywell International Inc.
These products are manufactured by Resideo
Technologies, Inc. and its affiliates.
LTEM-PXV
LT E
®
Cat M1 Cellular and Internet Communicator, Verizon (Available in US only)
LTEM-PXA
LTE Cat M1 Cellular and Internet Communicator, AT&T
IP-COM
Internet-only communicatior via Ethernet or optional Wi-Fi
PROWIFIZW
Wi-Fi/Z-Wave Module for Wi-Fi connection to the internet and/or for control of home automation devices
PRODCM
Dialer Capture Module for use with control panels that send Contact ID signals via Dialer
PROWIFI
Wi-Fi Module for Wi-Fi connection to the internet
LTEM-PXA, LTEM-PXV and IP-COM Advanced Modular Communicators
Specifications
PANEL COMPATIBILITY
DSC
®
PowerSeries
™
Compatibility:

PC1616, PC1832, PC1864
Interlogix
®
NetworX Series
Compatibility:

NX-8E, NX-4V2, NX-6V2, NX-8V2
Honeywell Home:

V IS TA
®
-15 P V 9.12 + ,

VISTA-20P V9.12+,

VISTA-21iP V3.13+
Resideo:
VISTA-128BPT V10.0+,

VISTA-250BPT V10.3+
DIMENSIONS
7.3” x 9.0” x 1.7” (18.6 cm x 22.8 cm x 4.4
cm)
WEIGHT
LTEM-PXV/LTEM-PXA: 16.5 oz. (468g)
IP-COM: 16.4 oz. (466g)
ELECTRICAL
Input power:
8VDC - 13.8VDC supplied
by the control panel
CURRENT DRAIN
Stand-Alone Unit:

LTEM-PXA/PXV: 220mA average active
IP-COM: 190mA average active
With Wi-Fi Module:

LTEM-PXA/PXV: 275mA average active
IP-COM: 240mA average active
With Dialer Capture Module:

LTEM-PXA/PXV: 230mA average active
IP-COM: 200mA average active
Wi-Fi
®
and Dialer Capture Modules:

LTEM-PXA/PXV: 310mA average active
IP-COM: 275mA average active
BACKUP BATTERY
None
RF
Antenna:
Internal multi-Band antenna
(LTEM-PXA/PXV Only)
BLE internal antenna
ENVIRONMENTAL
Operating temperature:

32°F to 120°F (0ºC to +49ºC)
Storage temperature:

-40°F to 158°F (–40ºC to +70ºC)
Humidity:
0 to 95% relative humidity,

non-condensing;

for UL installations 0% to 85%;

for ULC installations 0% to 93%
Altitude:
Up to 10,000 ft. (3,048m)
operating; to 40,000 ft. (12,192m) storage
DEVICES
78 Z-Wave
®
Plus Devices available when
PROWIFIZWAVE module is added:
60 Lights, Water Valves, Shades
6 Thermostats
6 Locks
6 Garage Door Controls
APPROVALS
These devices have been tested by ETL
to meet the following standards:
UL 1610 Central-Station Burglar-Alarm
Units
UL 1023 Household Burglar-Alarm
System Units
UL 365 Police Station Connected Burglar
Alarm Units and Systems
UL 985 Household Fire Warning System
Units
CAN/ULC-S304:2016 (IP-COM only)
CAN/ULC-S545:2002 (IP-COM only)
ETHERNET
®
Network Standard:
IEEE 802.3u
compliant
Data Rate:
10Base-T (10Mbps) /
100Base-T (100Mbps) with auto detect
Ethernet Cable:
Cat. 5 (min), MDI /

MDI-X auto crossover
WIRE LENGTHS
ECP and BUS connection maximum

wire lengths:
MINIMUM

WIRE GAUGE
DISTANCE FROM

CONTROL PANEL
#22
75 ft (23m)
#20
120 ft (27m)
#18
170 ft (52m)
#16
270 ft (82m)
ORDERING
EXTERNAL ANTENNA
COMPATIBILITY
CELL-ANTHB

PROLTE-ANT

CELLANT3DBPK
Separate antenna adapter is
needed if external antenna is
used (Part # ADPT-LTEMPX).