Honeywell 6150: Setting up User Codes on the Wired Keypad

there may be times when you want to add another user to the system such as a babysitter or relative in this video we'll show you how to create a new user code as well as edit or delete an existing code to create a new user code enter the four-digit master user code that was provided to you by your security company for this example we'll use one two three four then press the code or eight key then enter the new user number user numbers begin at zero three for this user we will enter 0 3 enter a new four-digit code for this user for this example we'll use 6 3 2 1 when you hear a beep the new user has been confirmed if you want to delete a user just do the following enter the master user code then press 8 then the user number finally press pound 0 the keypad will beep letting you know that the user has been deleted if you need to change the master code for any reason just do the following enter the master user code then press 8 enter the master user number then enter a new master user code we'll use 4 3 2 1 you will need to enter this new number twice in order for the change to take effect the keypad will be confirming that the new master user code is created