PowerG Heat Detectors Product Manuals

Manufacturer recommends that smoke and/or heat detectors be located throughout a protected premise following the recommendations of the current edition of the National Fire Protection Association Standard 72, National Fire Alarm Code (NFPA 72), manufacturer’s recommendations, state and local codes, and the recommendations contained in Guide for the Proper Use of System Smoke Detectors, which is made available at no charge to all installing dealers.

Qolsys TSB #210114 PowerG Devices Syncing in 2.5.3 and 2.5.4

Qolsys TSB190620 discusses an issue that affects v80.17 PowerG Radio Modem Firmware on the IQ Panel 2 Plus. Systems with v80.17 PowerG Firmware were experiencing delayed transmission on PowerG Sensors enrolled on Zones 1, 2, and 3. Update v80.25 resolved this issue. Learn all about Qolsys TSB190620.

The DSC PowerG Technical Data Sheet provides information and specifications regarding PowerG Sensors. This document explains PowerG Technology, the process for enrolling PowerG Sensors with an IQ Panel 2 Plus, Testing PowerG Sensors and which PowerG Sensors are supported. Learn about PowerG devices.