PowerG Smoke Detectors Product Manuals

System Sensor - Technical Field Bulletin Life Expectancy of System Smoke Detectors - Dated 05/2012

Manufacturer recommends that smoke and/or heat detectors be located throughout a protected premise following the recommendations of the current edition of the National Fire Protection Association Standard 72, National Fire Alarm Code (NFPA 72), manufacturer’s recommendations, state and local codes, and the recommendations contained in Guide for the Proper Use of System Smoke Detectors, which is made available at no charge to all installing dealers.

Qolsys TSB #200921 covers an issue that affects DSC PG9936 PowerG Smoke and Heat Detectors used with Qolsys IQ Panel 2 Plus Systems. The issue can result in the sensor remaining in its alarm memory state and have its red LED stay blinking after activating Installer/Test Mode on the IQ2+. Qolsys says in the TSB that they are working to offer a fix. The TSB is dated 09/21/20. Learn about this issue.

The DSC PowerG Smoke-Heat Detectors Data Sheet talks about the features and functions for the DSC PG9936 Smoke and Heat Detector. The data sheet touts the ease of install and maintenance, the reliability, the device specifications, and more. Learn about the DSC PowerG PG9936 Smoke and Heat Detector.

The DSC PowerG PG9936 Smoke/Heat Detector Install Guide teaches you how to get started with the DSC PowerG PG9936 Smoke & Heat Detector. This guide covers compatibility, operation, alarm silencing, detector trouble, maintenance, tamper, batteries, plus more. Learn how to get started with the PG9936.

Qolsys TSB190620 discusses an issue that affects v80.17 PowerG Radio Modem Firmware on the IQ Panel 2 Plus. Systems with v80.17 PowerG Firmware were experiencing delayed transmission on PowerG Sensors enrolled on Zones 1, 2, and 3. Update v80.25 resolved this issue. Learn all about Qolsys TSB190620.

The DSC PowerG Technical Data Sheet provides information and specifications regarding PowerG Sensors. This document explains PowerG Technology, the process for enrolling PowerG Sensors with an IQ Panel 2 Plus, Testing PowerG Sensors and which PowerG Sensors are supported. Learn about PowerG devices.