TP-Link TL-SF1005P - 5 Port 10/100 Mbps Switch with PoE+ - Data Sheet

MODEL: TL-SF1005P Datasheet

- With four PoE+ ports, transfers data and power on one single cable
- Working with IEEE 802.3af /at compliant PDs, expands your network
- Supports PoE Power up to 30 W for each PoE port
- Supports PoE Power up to 67 W for all PoE ports
- Plug and play, no configuration and installation required
- Up to 250 m data and power transmission under Extend Mode** specially designed for surveillance
system
- Priority Mode ensures high priority of port 1–2 to guarantee the quality of sensitive application
- PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the
dropped or unresponsive PD devices
Highlights
5-Port 10/100Mbps
Desktop Switch with 4-Port PoE+ Overview
TL-SF1005P is a 5 10/100Mbps ports unmanaged switch that requires no configuration and provides
4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at
compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in
one single cable allowing you to expand your network to where there are no power lines or outlets,
where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.
Power Over Ethernet
Four of the 5 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over
Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE
802.3af/at compliant Powered Devices (PDs).
Overload Arrangement
TL-SF1005P has the priority function which will help protect the system when the system power is
overloaded. If all PoE PDs power consumption is >= 67W, a priority will be arranged among the PoE
ports, then the system will cut off the power of the lowest-priority port.
Intelligent Power Management
Priority (port-1=port-2=port-3>port-4): This function will help to ensure the normal operation of the
system, it means Port 4 will be cut off when all total PoE PDs power consumption exceed 67 W. If port
1, 2 and 4 are consuming 15.4 W respectively, and an additional PoE device with 21 W is inserted to
port 3, the system will cut off the power of port 4 to compensate for the overload.
Highlight Performance
Up to 250 m PoE power supply and data transmission under Extend Mode**.
Priority Mode ensures high priority of port 1–2 to guarantee the quality of sensitive application.
PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the
dropped or unresponsive PD devices
TL-SF1005P is easy to install and use. It requires no configuration and installation. With desktop and
wall mountable design, outstanding performance and quality, the TP-Link’s TL-SF1005P 5-Port 10/100
Mbps Desktop Switch with 4-Port PoE+ is an ideal choice for expanding your network.
Easy of Use Specifications
Note:
* PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a
result of client limitations and environmental factors.
**The speed of the ports which are under extend mode will be downgraded to 10Mbps. Actual transmission distance may
vary from the quality of the cables.
www.tp-link.com
Specifications are subject to change without notice. All brands and product names are trademarks or registered trademarks of their respective holders. © 2023 TP-Link
Product P
ictur
e
Model
TL
-SF1005P
Standar
ds
IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af
, IEEE 802.3at
Int
er
face
6*10/100Mbps R
J45 P
or
ts with 4 P
oE+ P
or
ts(P
or
t 1 t
o P
or
t 4)
AUT
O Nego
tiation/
AUT
O MDI/MDIX
Net
work Media
10B
ASE-
T: UTP c
at egor
y 3, 4, 5 c
able (maximum 100m)
EIA
/TIA
-568 100Ω
S
TP (maximum 100m)
100BASE-
TX: UTP c
at egor
y 5, 5e c
able (maximum 100m)
EIA
/TIA
-568 100Ω
S
TP (maximum 100m)
PoE P
or
ts (R
J45)
Standar
d: 802.3 af/at compliant
PoE P
or
ts: P
or
t1- P
or
t4
Power Supply
: 67W
Transmission Method
Stor
e-And
-F
or
war
d
Swit
ching Capaci
t
y
1.2Gbps
Mac A
ddr
ess T
able
2K
Fan Quantit
y
Fanless
Extend Mode
YE
S
Priorit
y Mode
YE
S
PoE A
ut o R
ecover
y
YE
S (F
or P
or
ts 1-4)
Max P
ower
C
onsump
tion
3.19 W (220V
/50Hz. no P
D connect
ed)
75.08 W (220V
/50Hz. with 67 W P
D connect
ed)
Max Heat Dissipation
10.88 B
TU
/h (no P
D connect
ed)
256.02 B
TU
/h (with 67 W P
D connect
ed)
External P
ower Supply
External P
ower A
dap
ter (
Output: 53.5 VDC / 1.31 A)
LED
Power
, Link
/Act
, P
oE S
tatus, P
oE Max
Dimensions ( W x D x H )
3.9 x 3.9 x 1.0 in. (99.8 x 98 x 25 mm)
FCC
, C
E
, R
oHS
Package
C
ont
ents
TL
-SF1005P
, P
ower A
dap
ter , Installation Guide
En
vir
onment
Oper
ating T
emper
atur
e
: 0°C~40°C (32°F~104°
F
)
Stor
age T
emper
atur
e
: -40°C~70°C (-40°F~158°
F
)
Oper
ating Humidit
y
: 10% ~ 90%RH, non
-
condensing
Stor
age Humidit
y
: 5%~90%RH, non
-
condensing