Wireless Alarm Control Panels Frequently Asked Questions
How Do I Add a Remote Keypad to the Qolsys IQ Panel 2?
A keypad can be added to the Qolsys IQ Panel 2 by pairing the keypad with the panel from the installer menu. Only the IQ Remote will work as a remote keypad.
How Do I Program a SiXFOB to a Lyric Gateway?
The only way to learn-in a SiXFOB with a Lyric Gateway is to have your monitoring company remotely put the Gateway into learn mode and then enroll the device.
How Do I Add a 5869 to a LYNX Touch or Lyric System?
A Honeywell 5869 can be added to a LYNX Touch or a Lyric system by programming the device to the panel and then installing the device in a desired location.
How Do You Add a 2GIG AC2-PLUG to the 2GIG GC3?
The 2GIG AC2-PLUG power transformer connects directly to female barrel connection of the 2GIG GC3. Using the AC2-PLUG will make it easier to power the panel.
What is the Difference Between a Master Code and a Normal User Code?
A master code has the ability to add, edit, and delete other user codes. It can never deleted, only edited. A user code can only arm, disarm, and bypass.
How Do I Program a Window Sensor to a Honeywell L5100?
A window sensor can be programmed into an L5100 through the zone programming menu of the panel. You will need the panel's installer code to access this menu.
How Do I Program a 5834-4 Key Fob to an L3000?
A 5834-4 key fob can be programmed into an L3000 system through the programming menu of the panel. You will need the installer code to access this menu.
How Do I Enter Walk Test Mode on a Vista Panel?
You can enter walk test mode on the Vista-15P, 20P, 21iP panels by keying in Installer Code + [5] + [0]. The panel must be "Ready" to access test mode.
How Do I Add a Honeywell 5811 to a Lynx Touch?
A 5811 wireless sensor can be programmed to a Honeywell LYNX Touch alarm system through system programming. Make sure to test the sensor after programming.
Can I Pre-Program a Honeywell L5200?
The L5200 cannot be sent pre-programmed by Alarm Grid. However, the programming process is relatively easy for an end-user, and our team is happy to help.
A keypad can be added to the Qolsys IQ Panel 2 by pairing the keypad with the panel from the installer menu. Only the IQ Remote will work as a remote keypad.
Added:
How Do I Program a SiXFOB to a Lyric Gateway?
The only way to learn-in a SiXFOB with a Lyric Gateway is to have your monitoring company remotely put the Gateway into learn mode and then enroll the device.
Added:
How Do I Add a 5869 to a LYNX Touch or Lyric System?
A Honeywell 5869 can be added to a LYNX Touch or a Lyric system by programming the device to the panel and then installing the device in a desired location.
Added:
How Do You Add a 2GIG AC2-PLUG to the 2GIG GC3?
The 2GIG AC2-PLUG power transformer connects directly to female barrel connection of the 2GIG GC3. Using the AC2-PLUG will make it easier to power the panel.
Added:
What is the Difference Between a Master Code and a Normal User Code?
A master code has the ability to add, edit, and delete other user codes. It can never deleted, only edited. A user code can only arm, disarm, and bypass.
Added:
How Do I Program a Window Sensor to a Honeywell L5100?
A window sensor can be programmed into an L5100 through the zone programming menu of the panel. You will need the panel's installer code to access this menu.
Added:
How Do I Program a 5834-4 Key Fob to an L3000?
A 5834-4 key fob can be programmed into an L3000 system through the programming menu of the panel. You will need the installer code to access this menu.
Added:
How Do I Enter Walk Test Mode on a Vista Panel?
You can enter walk test mode on the Vista-15P, 20P, 21iP panels by keying in Installer Code + [5] + [0]. The panel must be "Ready" to access test mode.
Added:
How Do I Add a Honeywell 5811 to a Lynx Touch?
A 5811 wireless sensor can be programmed to a Honeywell LYNX Touch alarm system through system programming. Make sure to test the sensor after programming.
Added:
Can I Pre-Program a Honeywell L5200?
The L5200 cannot be sent pre-programmed by Alarm Grid. However, the programming process is relatively easy for an end-user, and our team is happy to help.
Added: