Telguard TG-1 Express Frequently Asked Questions

How do I wire my TG-1 with a Cat5 Cable?
Connect the Cat5 RJ45 to the female port on the TG-1 Express. Connect Blue to Ring, and Blue/Whi to Tip. Green and Bro/Whi connect to power. Learn to wire the TG1-Express.
Added:
What Is a TG-1 Express Alarm Communicator?
If you have an older panel with a phone dialer, then you might add a TG-1 Express to allow it to communicate across a cellular network. Learn about the TG-1 Express.
Added:
What Does the TG-1 Express Alarm Communicator Do?
If a panel has a phone dialer, then it can use a Telguard TG-1 Express as a cellular communicator. Find out how the Telguard TG-1 Express works and how it benefits a system.
Added:
Can I Use My Existing Panel with Alarm Grid Service and Telguard HomeControl Flex?
You may be able to bring your existing panel to Alarm Grid and use Telguard HomeControl Flex. If your panel is listed below, it is supported. Learn about HomeControl Flex.
Added:
How Do I Connect a TG-1 Express to my Older Legacy Panel?
The Telguard TG-1 Express mounts near the panel. It connects to the power and phone terminals of the panel. Learn how to connect the TG-1 Express to a legacy panel.
Added:
Can I Use a Cellular Module w/ VISTA Security Systems?
Find out if a cellular module can be used with a Vista security system
Added:
Is Telguard Interactive Used On Honeywell Vista Panels?
Learn how to set up Telguard Internative on a Honeywell Vista-P series panel.
Added:
Is 3G Cellular Monitoring Faster Than 2G Monitoring?
As cellular communication evolves, there are differences in speed from one generation to another. Find out if 3G cellular alarm monitoring is faster than 2G.
Added:
Can I setup Total Connect on an ADT Safewatch Pro 2000?
Find out if the Safewatch Pro 2000 supports the Total Connect service
Added:
Are Telguard systems good?
If you are considering a Telguard alarm communicator, read this FAQ.
Added: