2GIG GC3 vs Honeywell L5210, L7000 Security System
The 2GIG GC3, Honeywell L5210 and Honeywell L7000 panels have many things in common. All are all-in-one touchscreen alarm panels with WIFI, Cellular, and Z-Wave capabilities. All support Honeywell's 5800 Series wireless devices. Refer to the chart below for a full feature comparison:
Feature |
2GIG GC3 |
Honeywell L5210 |
Honeywell L7000 |
Touchscreen |
7” Capacitive |
4.3” Resistive |
7” Resistive |
Resolution |
800 x 480 pixels |
470 x 256 Pixels |
800 x 480 pixels |
Dimensions |
8.9” x 5.25” x 1.25” |
6.1” x 8.5” x 1.71” |
7.5” x 9.5” x 2.0” |
Wired Zones |
2 |
1 |
1 |
Wireless Zones |
100 |
63 |
79 |
Keyfob Zones |
32 fobs supported |
16 dedicated fob zones (4 4-button fobs) |
24 dedicated fob zones (6 4-button fobs) |
Additional Keypads |
Up to 4 |
Limited by range and availability of power only |
Limited by range and availability of power only |
Users |
100 |
32 |
48 |
Bell Output |
1 Solid State Bell Output, which will sound only when AC power is present. Provides 6 - 12 VDC at 120 mA of current. Attach Solid State sounding devices only, no electromechanical bells supported |
Supports 5800WAVE and 5800RL, has a built-in 85dB sounder, trigger can be used with power supply and low current relay to add a high current sounder |
Supports 5800WAVE and 5800RL, has a built-in 85dB sounder, trigger can be used with power supply and low current relay to add a high current sounder |
Programmable triggers |
2 Open Collector outputs, offering a combined 250mA of current at 16VDC. |
1K Ohm to ground negative trigger provides 3mA of current. |
1K Ohm to ground negative trigger provides 3mA of current. |
Z-Wave Support |
Integrated, supports up to 232 Z-Wave devices |
Added with the L5100-Z-Wave board, supports a total of 47 Z-Wave devices |
Added with the L5100-Z-Wave board, supports a total of 50 Z-Wave devices |
Garage Door Support |
Z-Wave: Limited by the number of Z-Wave device slots available. MyQ through Alarm.com: Each 828LM MyQ Internet Gateway supports up to 16 MyQ doors. Each 821LM MyQ Garage Universal Hub supports up to 2 Universal Garage Doors (each with sensor) and up to 16 MyQ doors. There is no prescribed limit to the number of these devices which can be used per account. |
Up to 3 using 5877GDPK |
Up to 4 using 5877GDPK |
Cellular support |
Not integrated: |
Not integrated: CDMA - Verizon (requires panel version 8) |
Not integrated: 3G - AT&T CDMA - Verizon (requires panel version 8) |
Wired Internet |
N/A |
ILP5 - Installs in the same slot as Cellular, so only one can be used |
ILP5 - Installs in the same slot as Cellular, so only one can be used |
WIFI Communication |
Integrated: Requires Firmware version 3.1.0 and up. |
Not integrated: Added using the L5100-WIFI |
Not integrated: Added using the L5100-WIFI |
Power Requirements |
100-240 VAC 50/60 Hz 1.7A 14VDC power adapter included. Lithium-Polymer backup battery included |
Plug-in power supply, 110VAC to 9VDC, 2.7A output. 4 or 24 hour backup Ni-MH battery (4 hour included) rated at 7.2VDC. |
Plug-in power supply, 110VAC to 9VDC, 2.7A output. 4 or 24 hour backup Ni-MH battery (4 hour included) rated at 7.2VDC. |
Firmware Upgrades |
Over the Air or USB |
Over the Air, currently, must be requested from Honeywell |
Over the Air, currently, must be requested from Honeywell |
Certifications |
US: UL985, UL1023, UL1635, Canada: ULC C1023, ULC S545-02 ANSI/SIA CP-01 2010, CSFM |
US: UL985, UL 1023, UL 1635 Canada: ULC-S545, ULC-Subject - C1023 ANSI/SIA CP-01-2010 |
US: UL985, UL 1023, UL 1635 Canada: ULC-S545, ULC-Subject - C1023 ANSI/SIA CP-01-2010 |
Did you find this answer useful?
We offer alarm monitoring as low as $10 / month
Click Here to Learn MoreRelated Products
Related Categories
- Answered
- Answered By
- Julia Ross