How Do I Add a DSC WS4904P Pet-Immune Motion to a DSC Impassa?

You can add a DSC WS4904P Pet-Immune Motion to a DSC Impassa by first putting the system into its enrollment mode for learning-in wireless devices. Then, activate the sensor's tamper switch by removing the back cover. The Impassa System should recognize this and auto-enroll the sensor.

If you would like to enroll a DSC WS4904P Pet-Immune Motion with a DSC Impassa Alarm System, complete the following easy steps:

1. Enter enrollment mode. Start from the main screen of the DSC Impassa with the system disarmed. Enter in the command [*] [8] [Installer Code] [898]. The default Installer Code for the system is 5555. If the command was entered in successfully, the message "wireless enrollment mode" will be displayed. This message indicates that a wireless device can now be enrolled with the system.

2. Enroll the device. The sensor can be learned-in with the DSC Impassa by activating its tamper switch. To do this, make sure there is a battery inserted into the motion sensor. Remove the back cover from the sensor to activate its tamper switch. The system should recognize that the sensor's tamper switch has been activated, and it will display the serial number for the sensor on the screen. Confirm that the serial number is correct. Then press the [*] key.

Next, the system will ask the user to choose a 2-digit zone for the sensor. The next available number will be displayed by default. But a different 2-digit zone number can be entered if desired. If you do enter in a different zone number, make sure that it is available on the system. Valid zone numbers are between 01 and 64. Press the [*] key with the desired zone number displayed to continue.

3. Configure the settings. The next step is to choose a Zone Type. This tells the system what action to take when the sensor is activated. Most motion sensors will use a Zone Type of 04 for interior. But a user can enter in a different Zone Type if desired. A complete list of Zone Types for the system is available on pages 42 thru 44 of the DSC Impassa Manual. Press the [*] once the Zone Type has been selected.

4. Test the motion. The panel will display the message "Activate Device for Test, Exit #". This message indicates that the device can now be tested. With the device in its desired location, try walking in front of the sensor. The motion sensor should detect motion and alert the alarm system. Press [#] to exit once you have confirmed that the sensor is working as it should.