How Do I Add a Honeywell IP Camera to Total Connect?

To add a Honeywell IP camera to Total Connect, you must contact the alarm company that provides your monitoring service and have them add the camera to your Total Connect account. After the camera has been added, you can use Total Connect to access and make changes to the device.

Before your Honeywell IP camera can be added to your Total Connect account, the IP camera must first be connected to the internet. This can be done using either a wireless WPS signal or a hard-wired ethernet connection. Once your IP camera has been connected, your alarm company will be able to proceed with adding it to your Total Connect account.

When contacting the alarm company, you will need to provide them with the MAC address for your IP camera. This is required to add the camera to your Total Connect account. The MAC address associated with your IP camera can typically be found on the back of the device. Make sure that you have this information ready when you call or email your alarm company to have your camera integrated with your Total Connect account.

After your alarm company has activated your camera, it is important to make sure that the process was successful and that the device is working as it should. You can verify this by accessing your camera on Total Connect. To do this, simply login to your Total Connect account and click on "Cameras". You should see your camera listed. At this point, you will be able to view a video feed and make any desired changes to the settings of the device.

Some of the cameras that are compatible with the Total Connect service include the IPCAM-WO outdoor security camera, the IPCAM-WL low-light security camera, the Lyric C1 indoor security camera and the IPCAM-PT2 pan and tilt security camera.