How Do I Change My Master Code On A 2Gig GoControl?

The master code is accessed in the User Management section of the user toolbox.

To access the user toolbox and change the master code on the 2Gig GoControl alarm panel, press the security icon on the home screen. From the security screen press menu, then toolbox.

A keypad display will appear requesting the master code be entered to allow toolbox access. Enter the existing 4 digit master code. If the master code is being set up for the first time, use the 2Gig GoControl default master code which is 1111.

After entering the master code, the screen advances to the toolbox. Select User Management. The master code is listed as the master user (the master code is also user number 1) and the 4 digit code will be displayed on the right side. Press master user and change pin will be displayed. Press change pin, a keypad will be displayed. Enter the new 4 digit master code and press OK. The control panel will ask for the new code to be confirmed. Enter the new 4 digit code again and press OK.

A confirmation screen will appear informing the master code (user 1) has successfully been changed. Press OK.

User codes 0000, 0001, the installer code and the 2Gig GoControl default installer code 1561 cannot be used as master or user codes.

The 2Gig GoControl alarm panel supports up to 48 wireless zones, 2 hardwire zones and 60 user codes, including the Master. The GoControl panel is a self contained burg alarm and home management system.