How do I set DIP switches on 5881ENH, 5881ENM, 5881ENL?
The DIP switches on a Honeywell 5881ENH, 5881ENM or 5881ENL wireless receiver are used to set the device address. DIP switch #1 must remain in the off position. DIP switch #5 should also remain off, except in the case of a commercial fire alarm installation. DIP switches #2, #3 and #4 are used to set the Honeywell 5800 Series wireless receiver device address.
DIP Switch Address Settings for 5881ENH, 5881ENM, 5881ENL
|
Address |
Dip Switch Position |
||
|
2 |
3 |
4 |
|
|
0 |
-- | -- | -- |
|
1 |
-- | -- | ON |
|
2 |
-- | ON | -- |
|
3 |
-- | ON | ON |
|
4 |
ON | -- | -- |
|
5 |
ON | -- | ON |
|
6 |
ON | ON | -- |
|
7 |
ON | ON | ON |
Did you find this answer useful?
We offer alarm monitoring as low as $10 / month
Click Here to Learn More
It's simple binary. Dip switch 4 = 1, Dip switch 3 = 2, Dip switch 2 = 4. Dip switch 1 has nothing to do with the address.
How does the dip switch determine the address .. for example dip switch 2 and 3 on is address 6.. please explain
I apologize that the FAQ isn't more clear but the 5881 Series receivers don't support address 20 and only supports addresses 1-7 which is why we only showed all possible device address examples. What system do you have that you want to use address 20 for your receiver?
This is stupid. An example would be nice. Such how should the dip switches be set to indicate address 20
Related Products
Related Categories
- Answered
- Answered By
- Joshua Unseth