Honeywell VISTA-20P Frequently Asked Questions
How Do I Program a Wired Zone on a Vista Panel?
Determine how you wish to connect your wired zone, then program each zone according to the way it is wired. Zone 1 must always be wired with a 2K end or line resistor. Zones 2 - 6 (15P) or 2 - 8 (20P, 21iP) can be programmed as Normally Open, Normally Closed, or EOL. Read on to learn more. Determine how you wish to connect your wired zone, then program each zone according to the way it is wired. Zone 1 must always be wired with a 2K end of line resistor. Zones 2 - 6 (15P) or 2 - 8 (20P, 21iP) can be programmed as Normally Open, Normally Closed, or EOL. Read on to learn more.
What is the Best Wired LCD Keypad?
If you are looking for the best wired LCD keypad, then you should look no further than the Honeywell Tuxedo Touch WIFI. The Tuxedo can control your security system, and supports Z-Wave device control. All of these features are available in an exciting, user-friendly color touchscreen.
Can I Get Notified by My VISTA When an Alarm is Set Off?
A user can choose to receive text and email alerts from Total Connect that will notify them whenever an alarm event occurs on their VISTA system. To do this, the VISTA system must first be set up with the Total Connect platform. An internet or cellular connection is needed to connect to the service.
Should I Change My Installer Code?
Most users find that there is no need for them to change the Installer Code on their security panel. This is because leaving their Installer Code at the default does not present any sort of security risk. Also, changing the Installer Code can lead to confusion and extra hassle for the user later on.
What Panels Does a GSMX4G Radio Work With?
A GSMX4G cellular communicator is designed for use with Honeywell VISTA panels, as well as the LYNX Plus L3000 system. The GSMX4G will provide the system with a 4G cellular connection using the AT&T cellular service, and it is fully compatible with the Total Connect 2.0 service provided by AlarmNet.
Do I Need a 5881ENH on My VISTA Security System?
A VISTA security system will not require a 5881ENH, or any other type of wireless receiver, if only hard-wired sensors are going to be used with the panel.
How Many 5881s Can I Hook Up to My VISTA Wired Security System?
The Vista P series panels support only 1 wireless receiver. The standalone receivers come in three capacities, Low, Medium, and High. A Low receiver supports up to 8 zones, Medium supports up to 16, and High supports as many as the panel will allow. Choose your receiver based on the zones needed.
What Brand of PIR Motion Can I Use with a VISTA 20P?
The Honeywell VISTA 20P can use any hardwired 12Volt DC passive infrared (PIR) motion detector, and any Honeywell 5800 series wireless motion sensor. Wired motions will require a 4-wire connection to the panel. Wireless motion detectors will require a wireless receiver to be used.
Can I Monitor My Existing Smoke Detectors Remotely?
Smoke detectors for a security system can be monitored through Total Connect or Alarm.com. The platform that is used will depend on the type of panel you have.
How Do I Wire a 2-Wire Smoke Detector to My Wired Alarm System?
A 2-wire smoke detector connects directly to a hard-wired zone on a wired alarm system. Learn how to interface a 2-wire smoke with your wired alarm system.
Determine how you wish to connect your wired zone, then program each zone according to the way it is wired. Zone 1 must always be wired with a 2K end or line resistor. Zones 2 - 6 (15P) or 2 - 8 (20P, 21iP) can be programmed as Normally Open, Normally Closed, or EOL. Read on to learn more. Determine how you wish to connect your wired zone, then program each zone according to the way it is wired. Zone 1 must always be wired with a 2K end of line resistor. Zones 2 - 6 (15P) or 2 - 8 (20P, 21iP) can be programmed as Normally Open, Normally Closed, or EOL. Read on to learn more.
Added:
What is the Best Wired LCD Keypad?
If you are looking for the best wired LCD keypad, then you should look no further than the Honeywell Tuxedo Touch WIFI. The Tuxedo can control your security system, and supports Z-Wave device control. All of these features are available in an exciting, user-friendly color touchscreen.
Added:
Can I Get Notified by My VISTA When an Alarm is Set Off?
A user can choose to receive text and email alerts from Total Connect that will notify them whenever an alarm event occurs on their VISTA system. To do this, the VISTA system must first be set up with the Total Connect platform. An internet or cellular connection is needed to connect to the service.
Added:
Should I Change My Installer Code?
Most users find that there is no need for them to change the Installer Code on their security panel. This is because leaving their Installer Code at the default does not present any sort of security risk. Also, changing the Installer Code can lead to confusion and extra hassle for the user later on.
Added:
What Panels Does a GSMX4G Radio Work With?
A GSMX4G cellular communicator is designed for use with Honeywell VISTA panels, as well as the LYNX Plus L3000 system. The GSMX4G will provide the system with a 4G cellular connection using the AT&T cellular service, and it is fully compatible with the Total Connect 2.0 service provided by AlarmNet.
Added:
Do I Need a 5881ENH on My VISTA Security System?
A VISTA security system will not require a 5881ENH, or any other type of wireless receiver, if only hard-wired sensors are going to be used with the panel.
Added:
How Many 5881s Can I Hook Up to My VISTA Wired Security System?
The Vista P series panels support only 1 wireless receiver. The standalone receivers come in three capacities, Low, Medium, and High. A Low receiver supports up to 8 zones, Medium supports up to 16, and High supports as many as the panel will allow. Choose your receiver based on the zones needed.
Added:
What Brand of PIR Motion Can I Use with a VISTA 20P?
The Honeywell VISTA 20P can use any hardwired 12Volt DC passive infrared (PIR) motion detector, and any Honeywell 5800 series wireless motion sensor. Wired motions will require a 4-wire connection to the panel. Wireless motion detectors will require a wireless receiver to be used.
Added:
Can I Monitor My Existing Smoke Detectors Remotely?
Smoke detectors for a security system can be monitored through Total Connect or Alarm.com. The platform that is used will depend on the type of panel you have.
Added:
How Do I Wire a 2-Wire Smoke Detector to My Wired Alarm System?
A 2-wire smoke detector connects directly to a hard-wired zone on a wired alarm system. Learn how to interface a 2-wire smoke with your wired alarm system.
Added: