System Sensor RRS-MOD with Multiple 4-wire smoke zones, no EOLSR on a VISTA-20P
Related Products
Document Transcript
Low End Panels
Step
-by-
Step
-
1 -
Provided by Tech Support
Updated on
8/17/11
Using Low Current Relay to Power Multiple 4-wire Smoke Detectors loops
with the RRS-
MOD
and no EOLSR
Notes:
Note 1.
If not using the EOL Supervision Modules you can activate (reverse Polarity)
all you
r smoke loops using 1 RRSMOD.
Note 2.
See additional docs for smokes using EOL Supervision Relay.
Programming:
*79 Output Device Mapping
*80 Output Function Programming
Output #17:
Output Function #1: (Fire Zone Reset)
Normally
Low
?
No
Activated By:
2 (zone type)
Zone Type:
54 (fire zone reset)
Action:
N/A
(Predefi
ned with Zone Type of 54 Selected)
Output #:
17 (trigger 17)
Note 3.
Trigger 17 only puts out 100mA current draw, if the total power consumption is greater that 100mA then you will have to
use a 4204 or a low current relay. The document below shows how to wire up a RBSN relay module to Trigger 17. Low End Panels
Step
-by-
Step
-
2 -
Provided by Tech Support
Updated on
8/17/11
- Uploaded