Wired to Wireless Security System Converters Frequently Asked Questions
How Do I Set Up the Honeywell 5800C2W with a Lyric Controller?
Each wired zone should be physically connected to the 5800C2W. Once connected, each wired input should be learned into a wireless zone on the Lyric. Learn to use the 5800C2W.
How Do I Incorporate a Wired Contact Sensor with a Wireless Alarm System?
There are a few different ways that a wired alarm contact can be used with a wireless system. The most common way is to use a converter. Learn about wired alarm contacts.
How Many Hardwired Zones Are On a Interlogix Simon XTi or XTi-5?
The Simon XTi and XTi-5 both support two hardwired zones. These zones are part of the 40 total zones that can be supported by the panel. If a user wants to use additional wired sensors, a wired to wireless converter is needed. Learn more about using hardwired sensors with an Interlogix System.
How Many Hardwired Zones Are On an Interlogix Simon XT?
The Interlogix Simon XT will support up to 40 different zones. Two of these zones can be hardwired or wireless, while the other 38 can only be wireless. Hardwired sensors can also use a wireless transmitter to communicate with the Simon XT. Learn more about using hardwired zones with the Simon XT.
What Loop Number Does a Resolution Products RE508x Use?
When using a Resolution Products RE508x with a Honeywell or 2GIG System, it will use Loop Number 1. This device will allow you to use hardwired security sensors with a wireless alarm system. The device can also be used with Cryptix, Interlogix (GE) and DSC Systems. Learn more about the RE508x.
Can I Add My Pre-Installed Wired Sensors to a Security Alarm?
Pre-installed hardwired sensors can be used with a new alarm system. This can save a user a large amount of money when upgrading to a new control panel. If the system is wireless, a wired to wireless converter will be needed. Learn more about using wired sensors with a new alarm system.
Are Old Honeywell Hardwired Contacts Compatible w/ Modern Systems?
It is possible to use old Honeywell hardwired contacts with a newer security panel, such as a LYNX Touch or a Lyric Controller. This can be done with a wireless converter, such as the Honeywell 5800C2W. The security devices will connect to the 5800C2W, which will use a wireless zone with the system.
Each wired zone should be physically connected to the 5800C2W. Once connected, each wired input should be learned into a wireless zone on the Lyric. Learn to use the 5800C2W.
Added:
How Do I Incorporate a Wired Contact Sensor with a Wireless Alarm System?
There are a few different ways that a wired alarm contact can be used with a wireless system. The most common way is to use a converter. Learn about wired alarm contacts.
Added:
How Many Hardwired Zones Are On a Interlogix Simon XTi or XTi-5?
The Simon XTi and XTi-5 both support two hardwired zones. These zones are part of the 40 total zones that can be supported by the panel. If a user wants to use additional wired sensors, a wired to wireless converter is needed. Learn more about using hardwired sensors with an Interlogix System.
Added:
How Many Hardwired Zones Are On an Interlogix Simon XT?
The Interlogix Simon XT will support up to 40 different zones. Two of these zones can be hardwired or wireless, while the other 38 can only be wireless. Hardwired sensors can also use a wireless transmitter to communicate with the Simon XT. Learn more about using hardwired zones with the Simon XT.
Added:
What Loop Number Does a Resolution Products RE508x Use?
When using a Resolution Products RE508x with a Honeywell or 2GIG System, it will use Loop Number 1. This device will allow you to use hardwired security sensors with a wireless alarm system. The device can also be used with Cryptix, Interlogix (GE) and DSC Systems. Learn more about the RE508x.
Added:
Can I Add My Pre-Installed Wired Sensors to a Security Alarm?
Pre-installed hardwired sensors can be used with a new alarm system. This can save a user a large amount of money when upgrading to a new control panel. If the system is wireless, a wired to wireless converter will be needed. Learn more about using wired sensors with a new alarm system.
Added:
Are Old Honeywell Hardwired Contacts Compatible w/ Modern Systems?
It is possible to use old Honeywell hardwired contacts with a newer security panel, such as a LYNX Touch or a Lyric Controller. This can be done with a wireless converter, such as the Honeywell 5800C2W. The security devices will connect to the 5800C2W, which will use a wireless zone with the system.
Added: