How Do I Find the IMEI Number on a Qolsys IQ Panel 2 Plus?

You can find the IMEI Number on a Qolsys IQ Panel 2 Plus by accessing the Cellular sub-menu within the About menu. The About menu can be found within Advanced Settings. You will need either the system's Master Code, Installer Code, or Dealer Code to access the menu and find the IMEI Number.

IMEI stands for International Mobile Equipment Identity. These digits are used to identify a cellular device. Each IMEI Number is 15 digits long, and it is usually unique to that particular device. You must provide the IMEI Number whenever you activate a cellular communicator for alarm monitoring service. Since the Qolsys IQ Panel 2 Plus has a cellular communicator built-in, each system will have an associated IMEI Number.

Complete the following steps to find the IMEI Number on a Qolsys IQ Panel 2 Plus:

1. Access Advanced Settings. Start from the main screen of the IQ Panel 2 Plus. Tap the small grey bar at the top. Choose Settings, then Advanced Settings. You will now need to provide a valid code. You can enter the Master Code (default 1234), Installer Code (default 1111), or Dealer Code (default 2222). Any of these codes will work for this application.

2. Find the IMEI Number. Choose the About menu. Then tap on Cellular. If necessary, scroll down in the sub-menu until you find IMEI. The IMEI Number should be displayed below.

3. Note the IMEI Number. You may want to write the IMEI Number down and store it in a safe place in case you need to access it later. Remember that you will need the IMEI Number when activating the IQ Panel 2 Plus for monitoring service. After you have noted the IMEI Number, you can return to the main menu by tapping on the picture of the house at the bottom of the screen.