Honeywell 702 Frequently Asked Questions
How Do I Add a High Current Siren to a 2GIG Edge?
The 2GIG Edge has a bell output, providing 120 mA of current. If you need a higher current siren, you must add a relay and power supply. Read on to learn more.
Which Wires Do I Use for My Siren?
A dual-tone siren will have three (3) wires, but you only use two (2) of them when connecting the siren. The other is left disconnected. Learn which wires to use for a siren.
Can I Add a Wired Siren to the Qolsys IQ Panel 2?
A wired siren can be added to a Qolsys IQ Panel 2 system. The device connects to the siren outputs on the back of the IQ Panel 2. The siren is powered using any 12VDC plug-in transformer. Once installed, it will function automatically. Learn more about using a wired siren with an IQ Panel 2.
How Do I Add a Honeywell Siren to a 2GIG GC3?
The 2GIG GC3 panel can have a Honeywell hard-wired siren installed directly to its circuit board. A siren can also be connected through a hard-wired relay.
How Many Decibels Does a Honeywell 702 Siren Output?
At 12 Volts DC, the 702 siren emits a 118 dB sound. 110 dB is considered the average human pain threshold for perceived sound. Keep reading to learn more!
How Do I Connect A 5800WAVE To My 2GIG GC3?
The GC3 panel supports most Honeywell 5800 series wireless devices, but does not support the 5800Wave wireless siren. Read on to find compatible alternatives.
Does the Lyric Gateway Have a Wire Trigger?
Many alarm systems offer a wide variety of outputs, including relays, sirens, and voltage triggers. Find out if the Lyric Gateway supports these features.
What does a honeywell 702 siren sound like?
Learn what a Honeywell 702 siren sounds like
How Loud Is the Siren on the 2GIG GC3 Security System?
Find out how loud the siren on the 2GIG GC3 security system is
How Do I Connect Red, Yellow, & White Wires To a Siren?
Learn how to connect red, yellow and white wires to a siren
The 2GIG Edge has a bell output, providing 120 mA of current. If you need a higher current siren, you must add a relay and power supply. Read on to learn more.
Added:
Which Wires Do I Use for My Siren?
A dual-tone siren will have three (3) wires, but you only use two (2) of them when connecting the siren. The other is left disconnected. Learn which wires to use for a siren.
Added:
Can I Add a Wired Siren to the Qolsys IQ Panel 2?
A wired siren can be added to a Qolsys IQ Panel 2 system. The device connects to the siren outputs on the back of the IQ Panel 2. The siren is powered using any 12VDC plug-in transformer. Once installed, it will function automatically. Learn more about using a wired siren with an IQ Panel 2.
Added:
How Do I Add a Honeywell Siren to a 2GIG GC3?
The 2GIG GC3 panel can have a Honeywell hard-wired siren installed directly to its circuit board. A siren can also be connected through a hard-wired relay.
Added:
How Many Decibels Does a Honeywell 702 Siren Output?
At 12 Volts DC, the 702 siren emits a 118 dB sound. 110 dB is considered the average human pain threshold for perceived sound. Keep reading to learn more!
Added:
How Do I Connect A 5800WAVE To My 2GIG GC3?
The GC3 panel supports most Honeywell 5800 series wireless devices, but does not support the 5800Wave wireless siren. Read on to find compatible alternatives.
Added:
Does the Lyric Gateway Have a Wire Trigger?
Many alarm systems offer a wide variety of outputs, including relays, sirens, and voltage triggers. Find out if the Lyric Gateway supports these features.
Added:
What does a honeywell 702 siren sound like?
Learn what a Honeywell 702 siren sounds like
Added:
How Loud Is the Siren on the 2GIG GC3 Security System?
Find out how loud the siren on the 2GIG GC3 security system is
Added:
How Do I Connect Red, Yellow, & White Wires To a Siren?
Learn how to connect red, yellow and white wires to a siren
Added: