Honeywell L7000 Frequently Asked Questions
Can I Update the Firmware On a Honeywell L5210, L7000 Alarm System?
The only way to update a Honeywell L5210 or L7000 System is to use the Honeywell LYNXTOUCH-MSD Firmware Updater Tool. Learn how to update the firmware on an L5210 or L7000 System.
How Do I Find the Firmware Revision for My Honeywell LYNX Touch System?
The firmware for a Honeywell LYNX Touch can be found within the Test Menu of the Master Tools Menu. It will be displayed at the top of the screen. Learn how to use the LYNX Touch.
How Do I Backdoor Into Programming on a Honeywell LYNX Touch System if I am Locked Out?
You will know that you are locked out of programming on a LYNX Touch because nothing will happen when you click "Program". Learn how to get into programming if you are locked out.
Will My Honeywell L7000 Work w/ SmartThings?
If you set your L7000 as a secondary Z-Wave controller for SmartThings, all the Z-Wave devices paired with SmartThings will be pushed over to the L7000. Learn about SmartThings.
How Do I Find the MAC/CRC on a Honeywell L7000?
Your alarm monitoring company will ask you for the MAC and MAC CRC codes when you go to register your Honeywell L7000. Learn what these codes mean and how you can find them.
How Do I Program a Honeywell L7000 Alarm System?
Sensors are enrolled with a Honeywell L7000 through programming mode. The user must go through and configure the settings for the zone. Learn how to program an L7000.
How Do I Use Resideo's New LynxTouch-MSD tool to Update my LynxTouch Panel?
Power the panel down. With the current firmware on the SD card, load the card into the tool. Attach it to the panel's edge connector, and power up. Learn to update the LynxTouch.
How Do I Clear a Glass Break Fault on a Honeywell L7000?
When a glass break sensor causes an alarm on a Honeywell L7000, you must Disarm the system twice to clear it. Learn about glass break sensors and how to clear an alarm.
How Do I Pair an IPCAM-WO to My Honeywell L7000?
The Honeywell L7000 can display the live feed for legacy Honeywell IP Cameras like the IPCAM-WO directly from its screen. Find out how to pair an IPCAM-WO to your Honeywell L7000.
How Do I Turn Off Arm-Confirm on a Honeywell L5210 or L7000 Alarm System?
Arm-Confirm has the panel produce a loud single tone when the system is Armed Away using a key fob or keypad. Find out how to turn off Arm-Confirm and stop this sound.
The only way to update a Honeywell L5210 or L7000 System is to use the Honeywell LYNXTOUCH-MSD Firmware Updater Tool. Learn how to update the firmware on an L5210 or L7000 System.
Added:
How Do I Find the Firmware Revision for My Honeywell LYNX Touch System?
The firmware for a Honeywell LYNX Touch can be found within the Test Menu of the Master Tools Menu. It will be displayed at the top of the screen. Learn how to use the LYNX Touch.
Added:
How Do I Backdoor Into Programming on a Honeywell LYNX Touch System if I am Locked Out?
You will know that you are locked out of programming on a LYNX Touch because nothing will happen when you click "Program". Learn how to get into programming if you are locked out.
Added:
Will My Honeywell L7000 Work w/ SmartThings?
If you set your L7000 as a secondary Z-Wave controller for SmartThings, all the Z-Wave devices paired with SmartThings will be pushed over to the L7000. Learn about SmartThings.
Added:
How Do I Find the MAC/CRC on a Honeywell L7000?
Your alarm monitoring company will ask you for the MAC and MAC CRC codes when you go to register your Honeywell L7000. Learn what these codes mean and how you can find them.
Added:
How Do I Program a Honeywell L7000 Alarm System?
Sensors are enrolled with a Honeywell L7000 through programming mode. The user must go through and configure the settings for the zone. Learn how to program an L7000.
Added:
How Do I Use Resideo's New LynxTouch-MSD tool to Update my LynxTouch Panel?
Power the panel down. With the current firmware on the SD card, load the card into the tool. Attach it to the panel's edge connector, and power up. Learn to update the LynxTouch.
Added:
How Do I Clear a Glass Break Fault on a Honeywell L7000?
When a glass break sensor causes an alarm on a Honeywell L7000, you must Disarm the system twice to clear it. Learn about glass break sensors and how to clear an alarm.
Added:
How Do I Pair an IPCAM-WO to My Honeywell L7000?
The Honeywell L7000 can display the live feed for legacy Honeywell IP Cameras like the IPCAM-WO directly from its screen. Find out how to pair an IPCAM-WO to your Honeywell L7000.
Added:
How Do I Turn Off Arm-Confirm on a Honeywell L5210 or L7000 Alarm System?
Arm-Confirm has the panel produce a loud single tone when the system is Armed Away using a key fob or keypad. Find out how to turn off Arm-Confirm and stop this sound.
Added: