Qolsys IQ Panel 2 Plus 345 MHz AT&T-LTE 10-1 PowerG Kit

The QOLSYS-5208-PGPK10-AT is complete security system kit designed for larger homes or small businesses. The kit includes a 345 MHz Qolsys IQ Panel 2 Plus System with Integrated AT&T LTE, a single DSC PG9914 PowerG Motion Sensor, and ten (10) DSC PG9303 PowerG Door and Window Contacts.

There are many reasons why the Qolsys IQ Panel 2 Plus is one of the best systems on the market today. It has a beautiful design that fits in with almost any decor, and its 7" touchscreen makes it a joy to use on a daily basis. It features 128 wireless zones, automatic Bluetooth disarming, built-in Z-Wave Plus, four (4) partitions, livestreaming for compatible Alarm.com Cameras, and so much more. This is the 345 MHz version that supports Legacy Honeywell, Legacy 2GIG, and PowerG Sensors.

PowerG Sensors like the DSC PG9914 and the DSC PG9303 are some of the best security accessories available. These sensors can communicate from up to 2,000 feet away from the IQ Panel 2 Plus in an open-air environment. They also utilize 128-bit AES encryption in all of their wireless communication. This makes them nearly impossible to hack or takeover wirelessly, and they are not prone to any RF jamming attacks. The PG9303 Contacts can be used on nearly any door or window, while the PG9914 offers pet immunity for animals weighing up to 85 pounds.

The system in this kit also includes a built-in AT&T LTE Communicator for communicating reliably with the Alarm.com servers. Cellular communication is great for alarm systems, as this type of connection almost never goes down or becomes unavailable. Using this system with ADC will also let you use the Alarm.com Mobile App for controlling the system remotely. It also includes a built-in WIFI card to make the system dual-path ready right out of the box. Remember that you must have a Gold Plan or higher to use the system with Alarm Grid.

Note: The IQ Panel 2 Plus supports up to 152 total Z-Wave devices for local Z-Wave control. There is also a smaller limit for different types of Z-Wave devices. The individual limit for each Z-Wave device type must be manually increased within Installer/Dealer Level Programming. Please also note that Alarm.com has its own smaller limit of 122 total Z-Wave devices for remote operation and use with smart scenes. More information on Alarm.com Z-Wave limits can be found in this FAQ.

The breakdown for the maximum allowed of each device type for local control, is shown in the table below. If you want more information on adjusting IQ2+ Z-Wave device limits, please check this other FAQ.

Note: Please see the following table for the complete device limits for the IQ Panel 2 Plus: