Qolsys IQ4 Hub 319.5 MHz AT&T LTE 10-1 Kit
10 Qolsys IQ DW Mini-S Door/Window Sensors, 1 Qolsys IQ Motion-S
Description
This encrypted kit contains a Qolsys IQ4 Hub with support for 319.5 MHz Qolsys and Interlogix/GE sensors. It has a built-in AT&T LTE cellular communicator and support for dual-band WIFI. Also included are ten (10) Qolsys IQ DW Mini-S door or window sensors and one (1) Qolsys IQ Motion-S. This kit can be used as an upgrade for an existing Interlogix/GE or Qolsys system.
The Qolsys IQ4 Hub included with this kit supports both the older, non-encrypted Qolsys or Interlogix/GE sensors, and the newer S-Line encrypted sensors. Qolsys S-Line sensors support rolling-code encryption. The panel and the sensor sync up during programming. From there, each signal sent between the sensor and the panel is different, with only the sensor and the panel knowing what the next transmission will be. This encryption prevents the transmission codes from being copied and resent. If you have a panel with 319.5 MHz sensors, and you'd like to replace the panel without having to replace every sensor, then this kit is for you. With the included S-Line sensors, you can add additional security to your system, and as older devices fail and have to be replaced, you can replace them with encrypted versions.
The IQ4 Hub provides the same user experience as the Qolsys IQ Panel 4. The IQ4 Hub has the same Qualcomm SnapDragon 8-core processor, 16GB of NAND Flash memory, Z-Wave Plus Controller, and 7" touchscreen display. Qolsys made some changes in the hardware to allow it to come in at a lower price point. The IQ4 Hub does not have a front-facing camera, which is used for disarm photos. It also has only one (1) speaker and one (1) 85 dB piezo siren and a single microphone. It doesn't support 2-way voice with the monitoring station, and it can't be paired with the Qolsys IQ Base. It also only supports a single RF frequency for sensors. It does support up to four (4) partitions, up to 128 Zones, and 242 User Codes.
The meat of this encrypted kit is the provided sensors. Ten (10) Qolsys IQ DW Mini-S door or window sensors come included. This ultra-compact sensor measures 2.25" H X 1" W X .5" D (5.7cm X 2.54cm X 1.27cm) and is perfect for protecting any type of opening. With S-Line technology, you get that extra level of protection that comes with encryption. It has a transmitting range of approximately 600' (182m) in open air. The IQ DW Mini-S uses two (2) CR2032 batteries, which are included.
The Qolsys IQ Motion-S has a coverage area of 30' X 40' (9.1m X 12.1m) and a transmitting range of about 600' (182m) in open air. As with all passive infrared (PIR) motions, avoid mounting the IQ Motion-S near HVAC vents, or other possible sources of movement or rapid temperature changes. This motion offers pet immunity for small pets up to 40 lbs (18.1kg). Be sure to follow the installation instructions for pet immunity. This includes not mounting the motion where animals can climb on furniture or stairs to come within detection range. It is powered by two (2) included AAA batteries.
Feature Comparison between the IQ Panel 4 and the IQ4 Hub:
(Features that differ are highlighted in yellow)
| Feature | IQ Panel 4 | IQ4 Hub |
|---|---|---|
| Processor | Qualcomm Snapdragon 8 core SOM | Qualcomm Snapdragon 8 core SOM |
| Memory | 16GB of NAND Flash | 16GB of NAND Flash |
| User Codes | Up to 242 (Role-based) | Up to 242 (Role-based) |
| WIFI Support | 802.11 a/b/g/n/ac dual-band 2.4/5Ghz - includes built-in Access Point Capability | 802.11 a/b/g/n/ac dual-band 2.4/5Ghz - includes built-in Access Point Capability |
| Cellular Technology | LTE Category 4 | LTE Category 4 |
| Automation Support | Z-Wave Plus (800): Up to 137 Devices) | Z-Wave Plus (800): Up to 137 Devices) |
| Bluetooth Support | Bluetooth Low Energy (BLE) 4.2: For Disarming and Audio Streaming | Bluetooth Low Energy (BLE) 4.2: For Disarming and Audio Streaming |
| LCD Display | 7" LCD, 1280 x 800 pixels, 300 cd/㎡, RGB 24 bit, 16.9 Million Colors | 7" LCD, 1024 x 600 pixels, 300 cd/㎡, RGB 24 bit, 16.9 Million Colors |
| Touchscreen Type | Capacitive Glass Multi-touch | Capacitive Glass |
| LED Indicator (Status LED) | Triple, Full-color RGB LED | Single, Full-color RGB LED |
| Speaker | 4W x 4, QuadSound, 4x 4W Front-facing speakers w/85 dB siren | 4W x 1, Front-facing speaker + 85 dB Piezo Siren |
| Microphone | MEMS x 3, (Micro-Electro-Mechanical System) with Echo Cancellation | MEMS x 1 (Front-facing) |
| Camera | Front-facing Camera, 8MP, Wide-Angle 120° Field-of-View, Fixed-Focus Camera, with Flex-Tilt Adjustment | No Camera |
| Two-Way Voice Support | Yes | No |
| Supports IQ Base | Yes | No |
For a full list of all specifications check out the Qolsys IQ Panel 4 Spec Sheet and the Qolsys IQ4 Hub Spec Sheet.
Door/Window Sensor Specifications:
- Sensor Type: Surface-Mounted Contact
- Operating Frequency: 319.5 MHz
- Communication: S-Line Encrypted Wireless
- Dimensions: 2.25" H X 1" W X .5" D (5.7cm X 2.54cm X 1.27cm)
- Signal Range: 600' (200m) Open Air
- Code Outputs: Tamper, Tamper Restore, Alarm, Alarm Restore, Low Battery, Supervisory
- Supervisory Interval: 70 Minutes
- Operating Temperature: 14°F - 122°F (-10°C - +50°C)
- Operating Relative Humidity: 5% - 95% Non-Condensing
- Approved Replacement Batteries: Two (2) CR2032 (Panasonic CR2032, Energizer CR2032, Duracell DL2032 recommended)
Motion Sensor Specifications:
- Motion Technology: Passive Infrared (PIR)
- Pet Immunity: Yes, up to 40 lbs (18kg)
- Signal Range: 600' (200m) Open Air
- Signal Outputs: Tamper, Tamper Restore, Alarm, Alarm Restor, Supervisory, Pairing, Low Battery
- Detection Area: 30' X 40' (9.1m X 12.1m)
- Maximum Horizontal Sensing Angle: 80°
- Dimensions: 3.4" H X 2.4" W X 1.5" D (8.6cm X 6cm X 3.8cm)
- Replacement Batteries: Two (2) AAA Alkaline (Huizhou Deanda Battery Co. AAA LR03 recommended)
Brand: Qolsys
Qolsys IQ4 Hub 319.5 MHz AT&T LTE 10-1 Kit Compatible Products
Kit Includes
