PowerG Door & Window Security Sensors Product Manuals

Qolsys TSB #210114 PowerG Devices Syncing in 2.5.3 and 2.5.4

The Technical Advisory Bulletin PG9303 Failure to Indicate Fault outlines a problem that occurred with DSC PG9303 Door and Window Contact Sensors shipped before May 15, 2019. The issue resulted in the sensor having a 20 second delay in reporting to the panel if the magnet is pulled away from the internal reed switch along the long edge of the sensor. The issue has since been fixed on later units. The technical advisory is dated from May 2019. Learn about this issue that once affected the PG9303.

Qolsys TSB190620 discusses an issue that affects v80.17 PowerG Radio Modem Firmware on the IQ Panel 2 Plus. Systems with v80.17 PowerG Firmware were experiencing delayed transmission on PowerG Sensors enrolled on Zones 1, 2, and 3. Update v80.25 resolved this issue. Learn all about Qolsys TSB190620.

The DSC PG9312 PowerG Outdoor Door/Window Contact Data Sheet covers specifications for the PG9312 PowerG Outdoor Door and Window Contact. This data sheet explains how the PG9312 is long-lasting, effective, enduring and easy to use. It also covers device compatibility. Learn all about the DSC PG9312.

The DSC PG9312 PowerG Outdoor Door/Window Contact Install Guide shows users how to install the DSC PG9312 PowerG Outdoor Door and Window Contact. The guide covers enrollment, installation, testing, device specifications, device functions and more. Learn to use the DSC PG9312 Door and Window Contact.

The DSC PowerG Technical Data Sheet provides information and specifications regarding PowerG Sensors. This document explains PowerG Technology, the process for enrolling PowerG Sensors with an IQ Panel 2 Plus, Testing PowerG Sensors and which PowerG Sensors are supported. Learn about PowerG devices.

The DSC PG9303 Install Guide teaches users how to mount and program the DSC PG9303 Vanishing Wireless Door and Window Contact. The guide explains installing the sensor by drilling holes into the wall. The sensor and magnet can also be mounted using double-sided foam tape. Learn about the DSC PG9303.