Honeywell 5800COMBO Product Manuals

The Resideo Technical Notice #55 Premature Low Battery Indication 5800COMBO and PROSIXCOMBO identifies an issue for Honeywell Combo Smoke and CO Detectors. This technical notice is dated December 7, 2020. Learn about the premature low battery indication for Honeywell Combination Life-Safety Sensors.

Application Guide for proper installation and placement of system-connected Carbon Monoxide Detectors

Honeywell 5800COMBO Smoke, Heat and CO Detector - Sensor enrollment and testing instructions

Honeywell 5800COMBO wireless smoke, heat and CO detector - Installation Instructions and Programming guide

Manufacturer recommends that smoke and/or heat detectors be located throughout a protected premise following the recommendations of the current edition of the National Fire Protection Association Standard 72, National Fire Alarm Code (NFPA 72), manufacturer’s recommendations, state and local codes, and the recommendations contained in Guide for the Proper Use of System Smoke Detectors, which is made available at no charge to all installing dealers.

Honeywell 5800COMBO - Specific PPM levels required to trigger an alarm along with minimum and maximum exposure times

Honeywell 5800COMBO - Wireless 5800 series smoke, heat and Carbon Monoxide detector for Honeywell wireless alarm systems

Honeywell 5800COMBO - Wireless 5800 series smoke, heat and Carbon Monoxide detector for Honeywell wireless alarm systems

Honeywell 5800COMBO - Wireless 5800 series smoke, heat and Carbon Monoxide detector for Honeywell wireless alarm systems