Telguard TG-1 Express
AT&T 3G Universal Cellular Alarm Communicator
This product is not sold by Alarm Grid at this time. As an alternative, we recommend:
Description
The TG-1 Express cellular alarm communicator can be added to virtually any alarm control panel that has a phone dialer on it. It will send all alarm signals out over the AT&T or Verizon LTE cellular network. The module physically connects to the tip and ring incoming phone line connections on your alarm system. The alarm panel will need to be programmed to dial out as if a phone line were connected. However when the system dials out it will reach the TG-1 and convert the wired phone line signal to a wireless cellular signal. Cellular communications are much more reliable than phone lines. The TG-1 also offers the ability to setup the HomeControl Flex app for remote access to your alarm system on your smartphone or tablet.
The programming portion requires the installer or dealer code for the alarm system. Unless your system has a "back door" method like a Honeywell system there is no way to get into programming without the installer code.
There is no cabling included with the TG-1 and we recommend using the jumper cable from the RJ-31X (purchased separately) to avoid having to customize these cable connections.
The following alarm panels are supported by Alarm Grid with the Telguard HomeControl Flex App:
Brand: Telguard