Frequently Asked Questions
How Do I Install The PRODCM in an LTEM-PA or LTEM-PV?
The dialer capture module is installed on the upper right side of the LTEM-P Series communicator after powering down. Read on to learn how to install it.
How Do I Install the PROWIFIZW in a LTEM-PA or LTEM-PV?
The PROWIFIZW is installed in the LTEM-P Series radio by powering the radio down, plugging the module in, then powering back up. For full info, keep reading.
How Do I Add a Resideo IPCAM-WOC2 to Total Connect 2.0?
Add the Resideo IPCAM-WOC2 to Total Connect 2.0 using an iOS or Android device running the app. Read on to learn about the IPCAM-WOC2 and Total Connect 2.0
How Do I Install a Resideo IPCAM-WOC2?
The IPCAM-WOC2 can be installed outside directly to a wall or soffit, or using a back box (recommended). Keep reading to learn how to install the IPCAM-WOC2.
Resetting an IPCAM-WOC2 to Use On a Different Network?
The reset switch is in one of the three dongles in the wire loom off the back of the camera. Press and hold until the LED blinks white. Read on to learn more.
How Do I Install a Honeywell Home PROA7PLUS To My Wall?
To install the ProSeries, install additional panel modules, run power and mount the backplate. Attach panel to the backplate then power on. Read on for details.
How Do I Connect a Honeywell Home PROA7PLUS to WIFI?
Enter Menu, then Settings, enter a valid code and go to WIFI Networks. Choose the proper network, enter the password, and connect. Keep reading to learn more.
How Do I Change a Master Code on a Honeywell Home PROA7?
The Honeywell Home PROA7 has one Master Code. To edit it enter Menu, Settings, User Management and entering the current Master Code. Keep reading to learn more.
Why Can't I Pair a PROWLTOUCH to a PROA7 or PROA7PLUS?
The ProSeries panel and the PROWLTOUCH find each other using a service called "Bonjour" or mDNS. Not all routers handle this well. Learn to overcome this issue.
How Do I Install an IPCAM-WOC1?
The IPCAM-WOC1 has a mounting base for easy install. Once the base has been attached to a back box with the included screws, complete the wiring. Learn to mount an IPCAM-WOC1.
The dialer capture module is installed on the upper right side of the LTEM-P Series communicator after powering down. Read on to learn how to install it.
Added:
How Do I Install the PROWIFIZW in a LTEM-PA or LTEM-PV?
The PROWIFIZW is installed in the LTEM-P Series radio by powering the radio down, plugging the module in, then powering back up. For full info, keep reading.
Added:
How Do I Add a Resideo IPCAM-WOC2 to Total Connect 2.0?
Add the Resideo IPCAM-WOC2 to Total Connect 2.0 using an iOS or Android device running the app. Read on to learn about the IPCAM-WOC2 and Total Connect 2.0
Added:
How Do I Install a Resideo IPCAM-WOC2?
The IPCAM-WOC2 can be installed outside directly to a wall or soffit, or using a back box (recommended). Keep reading to learn how to install the IPCAM-WOC2.
Added:
Resetting an IPCAM-WOC2 to Use On a Different Network?
The reset switch is in one of the three dongles in the wire loom off the back of the camera. Press and hold until the LED blinks white. Read on to learn more.
Added:
How Do I Install a Honeywell Home PROA7PLUS To My Wall?
To install the ProSeries, install additional panel modules, run power and mount the backplate. Attach panel to the backplate then power on. Read on for details.
Added:
How Do I Connect a Honeywell Home PROA7PLUS to WIFI?
Enter Menu, then Settings, enter a valid code and go to WIFI Networks. Choose the proper network, enter the password, and connect. Keep reading to learn more.
Added:
How Do I Change a Master Code on a Honeywell Home PROA7?
The Honeywell Home PROA7 has one Master Code. To edit it enter Menu, Settings, User Management and entering the current Master Code. Keep reading to learn more.
Added:
Why Can't I Pair a PROWLTOUCH to a PROA7 or PROA7PLUS?
The ProSeries panel and the PROWLTOUCH find each other using a service called "Bonjour" or mDNS. Not all routers handle this well. Learn to overcome this issue.
Added:
How Do I Install an IPCAM-WOC1?
The IPCAM-WOC1 has a mounting base for easy install. Once the base has been attached to a back box with the included screws, complete the wiring. Learn to mount an IPCAM-WOC1.
Added: